140583
48
Zoom out
Zoom in
Vorherige Seite
1/50
Nächste Seite
Reference44
English
Troubleshooting
There are a very many external influences and circumstances beyond the control of BenQ which
may be causing problems with your BenQ LCD display. Some of the more common and user
fixable problems are listed below for your assistance.
Please check the following list before calling your nearest BenQ Customer Service Center, and
attempt the following steps to diagnose and fix the problem yourself:
TV
Symptoms Possible Causes
Power does not turn ON
Check that the power plug is securely inserted into both the
AC Mains socket on the display and the wall outlet, and that
the wall outlet is switched on.
Check that power is available from the wall outlet by trying
another appliance or desk lamp from that same wall outlet.
There is no picture or sound
Ensure the display power is ON (Indicated by the green
Power indicator on the front of the unit)
Try a different input source to check whether the source is
at fault.
Check for mis-connection of cables or for wrong input
source.
There are spots on the screen
Your TV antenna signal is being affected by interference from
automobiles, trains, high-voltage transmission lines, neon
signs or another sources of interference. Try redirecting or
relocating your antenna to reduce the affects of the
interference. If the antenna is exterior, have a suitable
qualified and experienced antenna specialist adjust the
antenna.
Degraded colours or hue
Check whether all the picture adjustments have been
properly performed.
•Press the Preset button on the remote control to select a
different picture mode.
Improper screen position or size
Try selecting a different aspect ratio by pressing the Aspect
/ button on the remote control.
The image appears distorted
Ensure the display's aspect ratio is correctly set to suit the
image source.
The image appears too bright,
and there is a loss of definition
in the brightest areas of the
image
Reduce the contrast setting.
The DVD player is set for a high-level output.
The AV video signal has not been terminated properly
somewhere in the external AV equipment.
The image appears too 'washed
out', or the darkest areas of the
image appear too bright.
Reduce the brightness level till the black areas of the picture
appear as black.
The DVD player may be set at too high a brightness level.
Power indicator lamp flashes
red.
Check the PC cable for disconnection.
This indicates the PC input has been selected with no PC
source signal available.
The display has been placed in PC Standby mode.
"Out of range" appears
The PC input signal resolution is set too high. 1360 x 768 @
60Hz is the highest acceptable PC timing.
DV3251-En.book Page 44 Monday, December 12, 2005 4:07 PM
48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ dv 3251 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info