543111
4
Zoom out
Zoom in
Vorherige Seite
1/25
Nächste Seite
Preparation4
4. Press to select the item you want to modify and press MODE/ENTER.
5. Press / to move the cursor and the press / to enter the value.
6. To save the settings, press MODE/ENTER. If you do not want to save the settings,
press MENU/EXIT.
7. Press to highlight Apply and press MODE/ENTER.
After the above steps, your projector is now connected to your local area network and
ready to be accessed by any computer on the same local area network.
Wireless connection (for selective models)
1. Plug a BenQ wireless dongle (optional) to the USB Type A connector on the
projector.
2. Do one of the following:
•Press NETWORK SETTING on the remote control. The Network
Settings page is displayed.
•Press MENU/EXIT and then press / until the SYSTEM SETUP:
Advanced menu is highlighted. Press to highlight Network Settings and
press MODE/ENTER. The Network Settings page is displayed.
3. Highlight Wireless LAN and press MODE/ENTER.
4. Make sure the Status is Connect.
5. Make sure the SSID Display is On.
6. Make sure the SSID information is displayed. The default SSID is "NetworkDisplay".
7. Press to highlight Connection Mode and press / to select AP or
Infrastructure.
8. Press to highlight Apply and press MODE/ENTER.
Depending on the Connection Mode you selected, there are two ways to continue:
In the AP mode
The projector is able to operate as a wireless LAN access point, which is the default
setting of the projector. In this mode, the projector establishes a wireless LAN which
allows computers to connect to this specific wireless LAN.
1. Make sure the BenQ wireless dongle (optional) is plugged to the USB Type A
connector on the projector.
2. Press SOURCE to display the source bar and select Network Display to access
the SSID. The default SSID is "NetworkDisplay".
3. Search for this wireless LAN by the projector’s SSID from your computer.
Laptop computer
Desktop computer
Projector
Wireless dongle
Wireless dongle
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ SP840 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BenQ SP840

BenQ SP840 Bedienungsanleitung - Deutsch - 71 seiten

BenQ SP840 Bedienungsanleitung - Englisch - 71 seiten

BenQ SP840 Bedienungsanleitung - Holländisch - 71 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info