368138
6
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
10 11
Make sure that the harness straps are fixed in the right way,
after fitting the cover.
!
Removing the cover: alternative 1
Pay attention when you remove
the cover, as fitting the cover is
done in the opposite way.
The cover of the head rest
can be taken off separately by
disconnecting the hooks at the
backside and pulling off the fabric
to the front.
Start to take off the lower
seat part (15).
1-
3-
2-
Removing and refitting the cover
There are 2 versions of the
fabric cover. If there are
velcro squares (see green
arrow (13/14)), follow the
steps of alternative 1. If
there are no velcro squares
go to alternative 2.
Refit the cover
Mount the top part and then the shoulder parts. Mount the
seat part and bring the seat cover under the rear parts of
the sidewalls.
Pull the head rest in the highest position. Mount the head rest
cover and connect the hooks at the back side. Pull the harness
straps through the holes. Connect the loose bottom part of the
head rest fabric with the plastic part under the head rest.
Pull the harness straps through the opening of the seat cover
and lock the harness buckle. Pull the crotch strap through the
opening of the seat part.
3-
1-
2-
(13)
(14)
(15)
Removing the cover: alternative 2
Pay attention when you
remove the cover, as fitting
the cover is done in the
opposite way.
The cover of the head rest can be taken off
separately by disconnecting the hooks at the
backside and pulling off the fabric to the front.
1-
2-
3-
(16)
Refit the cover
Pull the harness straps through the opening of the seat cover
and lock the harness buckle. Pull the crotch strap through the
opening of the seat part.
Pull the loops of the harness straps from the bottom of the
seat part through the openings to the hooks in the bottom
of the seat. Hook both harness straps on the metal belt
hooks and pull the straps firmly to ensure that they are
correctly installed.
Pull the head rest in the highest position. Mount the head rest
cover and connect the hooks at the back side. Pull the harness
straps through the holes. Connect the loose bottom part of the
head rest fabric with the plastic part under the head rest.
2-
3-
1-
To remove the seat cover,
the harness straps must be
released at both sides. See
red circle. Start to take off the
lower seat part and unhook
both harness straps from the
metal belt hooks (16).
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BeSafe comfort wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info