Bedienungsanleitung BeSafe iZi Go Modular X1 i-Size (Seite 3 von 98) (Alle Sprachen)

768222

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

10 11

• Carrying handle (1a)

• Head cushion (1b)

• Head space reducer (1c)

• Handle release buttons (2x) (1d)

• Shoulder straps (2x) (1e)

• Hip belt hook (2x) (1f)

• Baby cushion (1g)

• Harness buckle (1h)

• Sun canopy (1i)

• Stroller release handles (4x) (1j)

• Shoulder belt hook (1k)

• Harness height adjuster (1l)

• Stroller adapter house (1m)

Preparing to install

Installation of the seat on the i-Size base

Removal of the seat of the i-Size base

Belt installation

1. Check if the ISOﬁx and ﬂoor support indicators on the base

are green. (2)

2. Position the seat in the correct position on the base untill it clicks with

the base and the indicator at the front shows green. (3)

3. Leave the carrying handle up in the carrying position.

4. When the seat is positioned rearfacing on the back seat of the vehicle,

you should, if possible, push the front seat of the vehicle backwards,

so that it is in contact with the child seat. If it is not possible to obtain

contact with the child seat, push the back rest of the front seat of the

vehicle forward as far as possible. (4)

5. The seat is delivered with removable SIP+ (side impact protection +).

This extra side impact protection should be used on the doorside of

the vehicle. It can be connected by slotting between the seatshell and

the fabric. The seat already oers high level integrated side impact

protection. This extra side impact protection improves the protection

in the side impact still further. (Not on all models) Do not use the SIP+

on the seat when the space between seat and door of the vehicle is too

small, which might lead to a situation where the seat is not positioned

correctly on the vehicle seat.

• The seat can be taken o by pulling the seat release handle at the

front of the base.

1. Position the seat on the vehicle seat. Make sure the carrying handle

is up in the carrying position. (5)

2. Guide the hip belt of the 3-point-belt over the blue sections under the

hip belt hooks and fasten the seat belt with a ‘click’. (6)

3. Guide the shoulder belt over the blue section through the shoulder

belt hook at the rear side of the seat shell. (7)

4. Tighten the 3-point belt by pulling the belt through the hip belt hooks

and through the shoulder belt hook until it is as tight as possible. (8)

5. Leave the carrying handle up in carrying position.

Positioning of the child

Baby cushion

1. Check that the shoulder strap slots are level with your child’s

shoulders. (9)

2. Pull the shoulder straps up while pressing the button of the central

adjuster. (10)

3. Open the harness buckle. (11)

4. The height of the shoulder straps and the head cushion can be

adjusted by pulling the release handle upwards at the back of the seat

and pulling the handle up or down. (12)

5. Position the shoulder straps over the marking at the sides of the seat

to use the magnets to keep the harness open while you position the

child. (13)

6. When the child is positioned, place the shoulder straps over the

child’s shoulders and close the buckle: CLICK! (14)

7. Pull the harness strap through the central adjuster in the direction of

the arrow straight up/forwards. Continue pulling until the harness is a

comfortable but a ﬁrm ﬁt. (15)

8. You can protect your child against the sun by raising the sun canopy.

• The baby cushion oers extra comfort for young babies. As baby

grows the thickness of the baby cushions can be adjusted.

• 0-4 m (16)

• 4 m + (17)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BeSafe iZi Go Modular X1 i-Size Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info