Bedienungsanleitung Bestway 61099 (Seite 3 von 56) (Alle Sprachen)

753201

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

• Inflate the air chambers with a HAND air pump.

An inflation scale is provided with the product. Inflate the product until the printed

scale is charged up to the same level as that of the supplied scale. (refer to the

table and illustrations below)

Caution: Under and over-inflation of the boat will result in safety hazards. It is

better to check the pressure of the boat each time before use. If you use another

pressure gauge, the boat pressure should not be more than the data given on the

builder’s plate.

• Never stand on or rest objects on the boat during inflation.

• Inflate the bottom chamber and other accessories such as the seat until it is stiff

to the touch, but NOT hard.

• Extended exposure to sun can shorten the lifespan of your boat. We suggest not

leaving boats in direct sunlight for more than 1 hour after use.

SAVE THESE INSTRUCTIONS

Assembling of the boat

NEVER USE HIGH PRESSURE AIR TO INFLATE INFLATABLES. THIS CAN

DAMAGE YOUR PRODUCT AND VOID YOUR WARRANTY

Oars Installation

For 61062, 61078, 61108, 61102

Note: When the oars are not in use, lock the oars into the Oar Clasps to avoid

damage.

Note: All drawings for illustration purpose only. May not reflect actual product.

Storage

1. Remove the Oars from the oarlocks.

Note: Keep all accessories for future use.

2. Carefully clean the boat using a mild soap with clean water.

Note: Do not use acetone, acid, and/or alkaline solutions.

3. Use a cloth to gently dry all surfaces.

Note: Do not dry the product in direct sunlight. Also, never dry with equipment

such as electric blowers. Doing so will cause damage and shorten the boat’s life

span.

4. Deflate the hull chambers. Deflate all the hull chambers at the same time so the

air-pressure drops simultaneously.

This will prevent damage from occurring to the boat's inner structures. Next,

deflate the floor.

5. Fold the boat from front to back to remove additional air. You can also use a

pump to drain any remaining air.

Repair

1. If there is a small puncture, repair it according to the instructions on the repair

patch.

2. If the hole is too big to be repaired with the provided patch, purchase a Bestway

repair kit or send the boat to a speciality shop to make the repair.

Registration (For US/Canada customers only)

If you need to register your boat, please have the boat Hull Identification Number

and model name ready and then visit www.bestwaycorp.com/support to obtain

your Certificate of Origin, or you can send e-mail to

service@bestwaycorp.us for the Certificate of Origin.

PLEASE KEEP THIS MANUAL IN A SECURE PLACE, AND HAND IT OVER TO

THE NEW OWNER WHEN YOU SELL THE CRAFT.

mc1112

1112

131415

Item

61078 / 61099

61062 / 61100 / 61108

61102

Product Inflated Size

1.55m x 93cm (61’’ x 37’’)

1.88m x 98cm (6’2’’ x 39’’)

2.32m x 1.15m (91’’ x 45’’)

Deflated Size

10cm

Inflated Size

Chamber 3

11.3cm

11cm

11.1cm

Inflated Size

Chamber 2

5.4cm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestway 61099 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info