Bedienungsanleitung Bestway 68079 - Sierra Ridge Air Pro X6 Tent (Seite 4 von 32) (Alle Sprachen)

687062

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Name: Sierra Ridge Air Pro X6 Tent

Model:68079

WARNING

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

Keep all flames and heat sources away from this tent fabric. We recommend that you always position your tent upwind from a camp

fire. This will reduce the chances of having embers land on your tent. In case of fire, please find the exit to escape from the fire.

Never set up the tent near a river, under a tree or other objective hazards.

This tent designed for use in mainly moderate weather conditions.

Keep exits clear.

Make sure ventilation openings are open all the time to avoid suffocation.

Set the ventilation openings to the right position and keep them locked in an upright position.

Overload may cause danger.

KEEP THE POLES INFLATABLE ENOUGH. UNDER-INFLATION MAY AFFECT TENT PERFORMANCE.

DO NOT OVER-INFLATE THE POLES. OVER-INFLATE MAY DAMAGE THE POLES.

DO NOT OPEN THE ZIPPER OF THE AIR POLES ESPECIALLY WHEN IT’S FULLY INFLATED.

Choose a suitable site removing any sharp objects, which might damage the groundsheet. Cat. B camping tent in accordance

with ISO 5912 (Performance level 1: for infrequent and short-term use. Although rain resistant, these tents should be used

mainly in fair weather.)

Outer tent: 640cm x (390cm + 110cm) x 225cm

Inner tent: 210cm x 360cm x 210cm

Pitching dimension: 840cm x 700cm

SAVE THESE INSTRUCTIONS

SETTING UP THE TENT

1. Lay the tent on the ground. Pull the four corners outwards.

2. Secure the four corners by pushing the pegs into the ground loops.

3. Inflate the tent with hand pump. The ideal inflation pressure will be around 6PSI or when the poles feel fully inflated.

4. Secure the tent with the pegs and guy ropes.

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.

MAINTENANCE AND STORAGE：

1. Clean the tent and remove any stains with a sponge and cool water.

Please use non-detergent soap for serious cleaning.

2. Please allow all parts to dry thoroughly before you repack the tent.

This will prevent the formation from mould, bad odours and discolouration.

3. Replace the Pole in case of air leakage.

4. Silicone spray could be use onto zippers if stick.

5. Deflate the tent by unscrewing the screw valve.

6. Store the tent in the stuff sack and place it in a cool, dry area out of sunlight and away from heat sources and rodents.

PARTS NO.

P3046B

P5C507

P5548

F4C073B-02

P61602

P61599

P61600

P61601

F2118

P5589

P5590

P5617

NAME

High pressure pump

Pressure Gauge

Peg

Screw Valve

Tent

AIRFRAME

Pole (660cm + 151cm Red mark on the end)

AIRFRAME

Pole (660cm + 131cm Blue mark on the end )

AIRFRAME

Pole (600cm Yellow mark on the end)

Guy Rope (Φ 3.8mm X 350cm)

Steel Pole (Φ 16mm X 180cm)

Fiber Glass Pole (Φ 9.5mm X 420cm)

Big peg

QTY

S-S-006022/14.0x21.0cm/68079/JS-YF-2016-B-17656/六人充气帐篷说明书/英

OWNER’S MANUAL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bestway 68079 - Sierra Ridge Air Pro X6 Tent Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info