Bedienungsanleitung Beurer IL 30 (Seite 5 von 24) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

470381

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Always close your eyes during the radiation! The recommended duration of treatment is maximum

12 minutes.

We recommend selecting a shorter radiation period to start with. However, the skin of some people may

show an over-sensitive (e.g. with extreme redness, blistering, itching, heavy sweating) or allergic reaction

to heat radiation, even when the lamp is used correctly. Examine the radiated section of the body regu-

larly. Discontinue radiation immediately if any signs of an over-sensitive or allergic reaction appear and

consult a physician.

The appliance has an adjustable lampshade. The four positions of inclination make it possible for you to

adjust the infrared lamp according to your needs.

Additional information

The timer of the IL 30 offers additional comfort. The timer is provided with a sliding switch which makes

it steplessly adjustable up to 12 minutes. The timer can be used as a time stop. In case you do not want

to use the timer function, select the

setting (continuous setting). In this case, pay attention to the

length of use. Prolonged use can damage the skin!

Control elements

Sliding switch

Continuous setting ( )

Off (0)

Length of radiation /min. (maximum 12 minutes)

Cleaning/changing the infrared lamp

Before every cleaning and when exchanging the infrared lamp, the appliance must be switched off, dis-

connected from the mains and must be cool.

The appliance can be cleaned with a damp cloth. Do not use any cleaning agents containing solvents

on the appliance. Ensure that no water penetrates the appliance. Use the appliance again only when it is

completely dry. Please note that only infrared lamps of the original type may be used as replacements.

Appliance: Replacement infrared lamp (type): Specifications: Explanation of symbols:

IL 30 Infrared PAR 38 E (150 W) 230V ~ 50 Hz

Note - read operating

instructions.

Application part Type B

Protection class II unit

Caution: hot surface

Important information –

Please retain for later use

Please read the information carefully and keep it accessible for other users.

• The lamp housing and the infrared lamp become very hot during operation. There is a risk of burning if

these are touched. Always let the lamp cool down first before touching it.

• Remove all packaging material before the appliance is used.

• The appliance may only be connected to the mains voltage mentioned on the type plate.

• While using the lamp on the face, always keep the eyes closed in order to avoid injury to the eyes (do

not look directly at the infrared light).

• This device is not intended for use by persons (including children) with restricted physical, sensory or

mental capabilities and/or by persons lacking the required understanding of the equipment and how

it is used, unless they are supervised by a person who is responsible for their safety or they are given

instructions on how to use the device.

Children should be supervised to ensure that they do not use the device as a toy.

• Do not use it on persons sensitive to heat.

0 2 4 6 8 10 12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beurer IL 30 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Beurer IL 30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info