2 3
PLEASE READ AND SA
IMPORT
When using electrical appliances, basic safety
precautions should always be taken including the
following:
1. Before connecting the heater
voltage indicated on the rating plate corresponds
to the
2. WARNING: In order to avoid overheating,
do not cover the heater ( ).
3. DO NOT position the heater directly under a
power socket.
4. Do not use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
5. If the supply cord or plug is damaged, it must
be replaced by the manufacturer or its service
agent or similarly qualied person in order
avoid hazard. The heater contains no user
serviceable parts. Should the product suffer
damage or breakdown, it must be returned to
the manufacturer or their service agent.
6. Under the environment with electrical fast
transient, the product may malfunction and
require user to reset the product.
7. Do not use this heater with a programmer
or any other device that switches the heater on
automatically
is covered or positioned incorrectly
8. Only touch the heater with dry hands.
9. DO NOT use this heater outdoors.
10.
children, especially the very young.
1 Allow a safe area around the heater away from
furniture or other objects; at least 50 cm from
the top and sides and 200 cm at the front.
12 Do not use this heater when it is lying on its side.
13.
explosive gas (e.g. petrol) or while using
inammable glue or solvent (e.g. when gluing
or varnishing parquet oors, PVC etc).
14.
15.
the main body of the heater
unplug heater when not in use and before
cleaning.
16.
overheating safety device will switch off the
heater
17.
18.
curtains or combustible material. Curtains or
combustible material may be burned if the
heater was installed incorrectly
19.
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety
Children should be supervised to ensure that
they do not play with the appliance.
20. WARNING: Risk of Fire. Discontinue
use if the outlet or plug become hot to the
touch. Overheating may indicate a worn
or damaged outlet. Consult a qualied
electrician for outlet replacement.
21. CA In order to avoid a hazard due
to inadvertent resetting of the thermal cutout,
this appliance must not be supplied through
an external switching device, such as a timer
or connected to a circuit that is regularly
switched on and off by the utility
DESCRIPTIONS (See Fig. 1, 2, 3 & 4)
A. Rear Base
B. Power Cord
C. Base Securing Screws (4)
D. Front Base
E. Control Panel
F Remote Control
G. Assembled Base
H. Indicator Lights
I. Power Button
J. Energy Saving Button
K. Fan Only Button
L. T
M. Thermostat Button
N. Oscillation Button
O. LCD Display
ASSEMBL
NOTE:
Unpack your
to remove all parts from plastic bags and
remaining packaging. Please save the carton for
off-season storage.
This model is packed with separate base in the
box. Carefully
T
before assembly
for Base assembly:
Base Assembly
Step 1:
and run the power cord through the
center of the base. Line up holes of the
base with holes on bottom of heater
housing, and secure with 4 provided
screws. (Refer to Fig. 1)
Step 2:
minders on the underside of the base.
(Refer to Fig. 2)
Step 3:
level surface prior to beginning operation.
(Refer to Fig. 3)
Remote Control
Y
the remote
two (2) AAA
note this remote control will not work through
walls.
Batter
a) Remove battery cover from remote control.
b) Remove batteries from the remote control.
c) Insert two new batteries, pressing them rmly
into their slot.
d) Replace the battery cover
NOTES:
• Replace all
• Being careful not to bend or damage the
contact spring, clean the battery contacts and
the devices’
batteries.
• Remove the batteries from the equipment
when it is not being used for an extended
period of time.
• Remove the used batteries promptly
• Do not mix old and new batteries. Do not
mix alkaline, standard, (carbon-zinc), or
rechargeable batteries.
• Do not discard used batteries into
household trash containers. Contact your
local governments for disposal or recycling
practices in your area.
The remote control for this unit has the capability
of operating all control panel functions. Please
note this remote control will not work through
walls.
OPERA
1. Plug heater into a standard outlet. Once
plugged in, the Power Light will illuminate,
and the room temperature will appear on the
LCD Display
2. Operate heater by pressing the Power Button
( ) and selecting modes and settings
according to preference.
NOTE: Remove the plastic lm from the
control panel before using (if included).
Po
Press the Power Button ( ) to turn the heater
on. Once on, the heater will run in the Max Heat
mode and the Stay On icon will appear on the
LCD Display ) to
manually turn off the heater at any setting.
NOTE: The Power Light will remain illuminated
while unit is plugged in.
Mode Selection
Select your desired heat settings by pressing the
corresponding buttons as located on your heater
or remote control.
next to
setting/mode is activated.
Fan Only Setting
Press the Fan Only Button to run the heater
without heat output. The Stay On icon will
appear on the LCD Display
Energ
Press the Energy Saving Button ( ) to activate
the energy efficient Mode.
cycle between high (at 2500W) and low (at
1250W) heat settings to provide heat. The Stay
On icon will appear on the LCD Display
Ther
Y
that allows you to set your heater to the desired
comfort level by pressing the Thermostat Button
( ) on the control panel or remote control:
NOTE: The Thermostat icon ( ) will appear
on the LCD Display
T
Button ( ) to adjust the temperature from from
18°C to 30°C (Default: 18°C, and each press of
the button
temperature level). The LCD Display will show
the selected temperature reading. When the
preset temperature is reached, the heater will
shut off and cool down for 15 seconds. When the
room temperature drops below the preset
temperature, the heater will automatically turn on
again to maintain the preset temperature level.
ENGLISH
Fig. 4
BCH9300
A
B
B
C
D
F
E
G
H
I
I
J
J
K
K
L
L
M
M
N
N
O
Fig. 3
Fig. 1
Fig. 2
BCH9300-050_12MLM1.indd 4-6 5/8/12 11:08 AM
