Bedienungsanleitung Bissell Powerfresh 1440 (Seite 6 von 7) (Englisch)

622000

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Before you clean

Thoroughly sweep or vacuum floor prior to

cleaning with the PowerFresh™ Steam Mop.

Cleaning hard floors

Your PowerFresh™ Steam Mop is designed

to clean hard flooring such as ceramic tile,

vinyl, laminate, marble, stone and sealed

hard wood floors. Use of your PowerFresh™

Steam Mop on waxed or some unwaxed

floors may result in a diminished glossiness.

The PowerFresh™ Steam Mop is not for

use on unsealed wood floors. For best

results test in an inconspicuous area

and check the care instructions from

your flooring manufacturer.

To sanitize an area of your floor, place

the hard floor cleaner over the spot for

a minimum 15 seconds using continuous

steam, but no longer than 20 seconds using

continuous steam. For larger areas, overlap

mop head placement.

1. Plug the unit in and wait 30 seconds for

it to heat up. Choose the level of steam

to clean your floor: Low (delicate floors),

Medium (regular cleaning), High (durable

floors or sticky messes). Begin cleaning by

slowly passing the unit over the floor surface.

2. To thoroughly clean dried-on sticky spots

place the scrubby pad on the steam mop.

Then press and lock the Easy Scrubber brush

into place and slowly move the brush over

the sticky spot to remove.

3. When the PowerFresh™ Steam Mop

stops emitting steam, unplug the unit.

Simply remove the water tank, refill,

and continue cleaning.

Carpet Refresher Attachment

This accessory is recommended for the

refreshing of carpets. Once the steam mop

is cradled in the carpet refresher attachment,

it will easily glide over the carpet.

NOTE: Always be sure a mop pad is in

place before placing in carpet refresher

attachment. Only white mop pads should

be used with the carpet attachment. Do

not use carpet attachment on spots or

stains, or glide it over the same spot for

longer than 20 seconds.

1. Place the swivel mop head, with mop pad

attached, in the carpet refresher attachment.

NOTE: The PowerFresh™ Steam Mop rests

in the carpet refresher attachment and may

not stay attached to the swivel mop head.

It is meant to glide over the carpet.

2. Fill water tank with water. Begin refreshing

your carpet or rug by depressing the

Steam-on-Demand trigger while pushing the

PowerFresh™ Steam Mop in a forward and

backward motion, releasing steam as you go.

3. When you have finished refreshing your

carpet or rug, unplug the steam mop and

remove from the carpet or rug.

NOTE: Move the PowerFresh™ Steam

Mop and carpet refresher attachment in a

continuous motion until you are finished.

This product is not intended to be used as

a carpet cleaner, only a carpet refresher

or deodoriser. Never attempt to use the

PowerFresh™ Steam Mop on carpet without

the carpet refresher attachment in place. DO

NOT leave the mop in a stationary position.

Maintenance & Care

When you’re done

1. Unplug power cable from electrical socket.

2. Carefully remove the mop pad using the

Quick Release™ tab from the mop head. The

mop pad and lower assembly may be hot.

Remove Spring Breeze Freshening Disc from

mop pad.

3. Any water remaining in the water tank

should be emptied prior to machine storage.

4. Mop pad can be machine washed in warm

water. Use only liquid detergents. Do not use

fabric softeners or bleach. For best results,

air dry.

5. Wrap power cable around quick

release cable wrap on back of PowerFresh™

Steam Mop.

6. Wipe all surfaces of PowerFresh™ Steam

Mop with a soft cloth. Store upright in a

protected, dry area.

Exercise extreme care when using the steam

mop on timber ﬂooring. Ensure the steam mop is

thoroughly tested in an inconspicuous area prior to

mopping a large ﬂoor area. The steam mop generates hot steam,

so when depressing the trigger to apply steam, ensure the steam

mop is moving continuously. The trigger does not need to be

depressed at all times. Prolonged application of steam in one area

increases the risk of damage to the surface treatment on timber

ﬂoors. Check with your timber ﬂoor treatment application specialist

prior to steam mop operation. Regular foot trac and direct

sunlight will wear down timber ﬂoor surface treatment, making it

more susceptible to steam damage. Exercise extreme care when

using the steam mop on timber ﬂooring.

Never put descaling, aromatic, alcoholic, or

detergent products into the steam cleaner, as this

may damage it or make it unsafe for use.

Tinted plates on foot may get hot while steam mop is in use.

Do not touch while hot.

Upright storage of the PowerFresh™ Steam Mop with a wet mop

pad may result in the formation of white marks on your ﬂoor.

To remove the white marks, clean area with vinegar.

www.BISSELL.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bissell Powerfresh 1440 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bissell Powerfresh 1440

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info