669283
17
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
9
www.BISSELL.com
17
Maintenance: Replacing Small Belt, Large Belt,
or Brush Rolls (continued)
6 7
5
If only one spins, the opposite belt is
broken and you must remove both
brushes and replace the Small Cogged
Brush Belt.
Place the new belt around both brush
gears and slide them onto the thin
metal axles.
To replace the Cogged Large Pump
Belt, make sure your Revolution is
completely reclined. Begin by wrapping
the Cogged Large Pump Belt around
the small metal-toothed pulley. While
wrapped around the pulley, stretch and
wrap around the nearest brush gear.
Return the Belt/Brush
Access Plate to the end of
the brush rolls by securing
with the 3 screws.
Return the Brush Cover.
Make sure that the brushes
are aligned and the cover
is secure.
Now, if the Flat Pump Belt
was broken, place a new
Flat Pump Belt around the
red area of the large pulley.
Then use your thumb to
stretch it toward the back
of the machine and transfer
it onto the metal axle.
Lastly, slide the Belt
Access Door back into
place. You should hear
it “click” into place.
8
Spin either brush. If they both spin,
continue to Step 7.
Turn the machine
to lay on its back.
10
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bissell PROHEAT 2X REVOLUTION - 1550 series wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info