578002
5
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
5
ENGLISH
Do not set up the tool at a position where the laser beam
can cross any person at head height.
Do not let children come near the laser.
Features
1. On/off switch
2. Levels
3. Laser aperture
4. Battery cover
Assembly
Warning! Make sure that the tool is switched off.
Fitting the batteries (fig. A)
Remove the battery cover (4) from the tool.
Insert the batteries into the tool in the orientation as
shown.
Refit the cover and let it click into place.
Wall mounting (fig. B & C)
The tool can be mounted to walls using one of the wall
mounts (5 or 6). The wall pin (5) is used to hang the tool to
drywalls. The keyhole mount (6) is used to hang the tool on
other types of wall using a screw or nail.
Warning! Keep the wall mounts in a safe place when not in use.
Wall pin
Fold out the spade pin (7).
Hold the wall pin in front of a suitable location and press
the pin straight into the wall.
Install the tool by clinging the magnet (8) to the wall pin (5).
Warning! The wall pin is sharp and should be handled with care.
Keyhole mount
Drive a screw or nail into the wall.
Hang the wall mount (6) onto the fastener.
Install the tool by clinging the magnet (8) to the keyhole
mount (6).
Use (fig. D)
Place the tool flat against the wall as shown.
Push the on/off switch (1) up to switch the tool on.
Move the tool as necessary to position the laser line.
Hang the tool on the wall using the appropriate wall mount.
Adjusting the laser line (fig. E)
In order to project a vertical line, adjust the tool until the
vial (9) is level.
In order to project a horizontal line, adjust the tool until
the vial (10) is level.
Using the scale
The scale (11) on the wall mount can be used for angular
adjustment.
Align the 0° position on the scale with the pointer on the
tool by turning the wall pin.
To check an angle, adjust the scale as necessary.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair agent
by contacting your local Black & Decker office at the address
indicated in this manual. Alternatively, a list of authorised Black &
Decker repair agents and full details of our after-sales service and
contacts are available on the Internet at: www.2helpU.com
Batteries
At the end of their useful life, discard batteries with
due care for our environment.
Remove the batteries as described above.
Place the batteries in a suitable packaging to ensure that
the terminals cannot be short-circuited.
Take the batteries to a local recycling station.
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Black Decker BDL120 T1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Black Decker BDL120 T1

Black Decker BDL120 T1 Bedienungsanleitung - Polnisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info