Bedienungsanleitung Black Decker BDLB14 (Seite 4 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

53655

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

ENGLISH

battery(s). Inserting batteries into

power tools and appliances that have

the switch on invites accidents.

X Under abusive conditions, liquid

may be ejected from the battery,

avoid contact. If contact accidentally

occurs, flush with water. If liquid

contacts eyes, additionally seek

medical help. Liquid ejected from the

battery may cause irritation or burns.

X Carefully follow all instructions and

warnings on the battery label and

package.

X Always insert batteries correctly with

regard to polarity (+ and -), marked on

the battery and the equipment.

X Do not short battery terminals.

X Do not charge batteries.

X Do not mix old and new batteries.

Replace all of them at the same time

with new batteries of the same brand

and type.

X Keep batteries out of the reach of

children.

X Remove batteries if the device will not

be used for several months.

X Never attempt to open for any reason.

X Do not store in locations where the

temperature may exceed 40 °C.

X When disposing of batteries, follow the

instructions given in the section

"Protecting the environment".

X Do not incinerate the batteries.

Features

This appliance includes some or all of the

following features:

1. Hook

2. LED light bar

3. On/off/ button (BDLB14)

4. Battery compartment

5. On/off button (BDLB28)

Assembly

Installing the batteries (fig. A)

Warning! Use AA size batteries only. Use

alkaline batteries only.

X Turn the light bar upside down to get

access to the battery compartment

cover (4).

X Unscrew the battery compartment

cover (4) anti-clockwise and remove it.

X Insert three new alkaline AA batteries

(5), make sure to match the (+) positive

and the (-) negative terminals correctly.

X Locate the cover (4) into the base of

the light bar. It will only fit one way, do

not force it.

X Screw the cover (4) of the battery

compartment clockwise to lock it into

position.

Use

Using the hook (fig. B and C)

X The hook (1) may be used to store or

suspend the light bar. The hook rotates

so that the light bar (2) can be set to

any position. Make sure that the hook

is secure around the supporting object.

Operating the 360 light bar (BDLB28)

(fig. B)

X Press the on/off button (3) once for

torch (focused beam).

X Press the on/off button (3) again to

illuminate area light.

X Press the on/off button (3) again to

illuminate the lantern.

X To turn the unit off, press the on/off

button (3) again.

Operating the mini light bar (BDLB14)

(fig. C)

X Press the on/off button (5) once to

illuminate six of the LED's.

X Press the on/off button (5) again to

illuminate all of the LED's.

X To turn the unit off, press the on/off

button (5) again.

Maintenance

Your Black & Decker tool has been

designed to operate over a long period of

time with a minimum of maintenance.

Continuous satisfactory operation

depends upon proper tool care and

regular cleaning.

Warning! Before performing any

maintenance or cleaning of the tool, unplug

the unit from the power supply.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BDLB14 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info