Bedienungsanleitung Black Decker BDM100 T1 (Seite 4 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

578012

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH

Fig. A

8. Set key

9. Measurement system key

10. Memory recall key

11. Multiply key

12. Add key

13. Subtract key

14. Store key

15. Sum key

Assembly

Fitting the battery (fig. B)

◆ Remove the battery cover (7) from the tool.

◆ Connect the battery to the connector. The larger battery

terminal connects to the smaller connector terminal.

◆ Refit the cover and let it click into place.

Use

Setting the tool (fig. A, C & E)

The tool can show the results measured from either the front

(18) or the back (19).

◆ To switch from one measurement method to the other,

press key (8).

Setting the measuring head (fig. E)

◆ Turn the measuring head. Do not set the head at

intermediate angels, as this will lead to inaccurate results.

Selecting the measurement system (fig. A & D)

The appliance can show the results both in the metrical (16)

and the imperial system (17).

◆ To switch from one measurement system to the other,

press key (9).

Memory function (fig. A & D)

The use of the memory function (20) is indicated on the display.

◆ Press key (14) to store the value on the display in the

memory. The value remains stored as long as the

appliance is switched on.

◆ Press key (14) again to clear the memory.

Switching on and off (fig. B)

◆ To switch the tool on, slide the on/off switch (1) to

postion I.

◆ To switch the tool off, slide the on/off switch to position 0.

Measuring (fig. A)

◆ Hold the tool at the required position with the measuring

head aimed at the opposite surface.

◆ Press key (5). The result appears on the display (4).

Note:

- During a measurement the laser dot helps identifying the

opposite surface.

- After 15 seconds of inactivity the LCD screen will go

blank. The last measurement data will not be retrieved

unless it has been stored in the memory.

Measuring distances (fig. A)

◆ Measure the first distance

◆ Press key (12).

◆ Measure the following distance.

◆ Repeat the previous instruction as many times as required

for the remaining distances.

◆ Press key (15). The result appears on the display (4).

Measuring areas (fig. A)

◆ Measure the length.

◆ Press key (11).

◆ Measure the width.

◆ Press key (15). The result appears on the display (4) in

square units.

Measuring volumes (fig. A)

◆ Measure the length.

◆ Press key (11).

◆ Measure the width.

◆ Press key (11).

◆ Measure the height.

◆ Press key (15). The result appears on the display (4) in

cubic units.

Hints for optimum use

◆ Use the tool only in an open space, without obstacles in

the measuring path.

◆ During a measurement avoid moving the tool until the

distance is displayed.

◆ To ensure a correct reading, repeat the measurement until

you get at least 2 of the same readings within 3 attempts.

◆ For successful measuring results, consider the following

conditions:

- The measured object surface must be flat and hard.

- Distance measuring through glass is not possible.

- When the distance is out of the work range, the tool

will beep and register an error.

Low battery indicator (fig. D)

The LCD screen will display a low battery symbol (21) when

the battery is nearly empty.

◆ Replace the battery on time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BDM100 T1 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker BDM100 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info