Bedienungsanleitung Black Decker BDPC10USB (Seite 4 von 8) (Englisch)

53645

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Connecting to a power source using the 12 Vdc

accessory plug (fig. A - C)

The tip of the plug is positive (+) and the side contact is

negative (-).

X Unfold the 12 Vdc accessory plug (4) from the body of

the stick to one of the 5 preset positions.

X Connect the power converter to the power source by

inserting the 12 Vdc accessory plug (4) firmly into the

accessory outlet of a vehicle or other dc power source.

X The green LED (3) will light when a good connection is

made.

X Lift the USB cover (2) to allow access to one or both of

the USB ports (1).

X Plug the USB connector from the equipment you wish to

operate into the USB port (1) and run the appliance as

normal.

Note: You can operate two USB devices simultaneously.

Warning! Do not use with positive ground electrical

systems, (i.e older vehicles).

Warning! A reverse polarity connection will result in a blown

fuse and may cause permanent damage to the power

converter.

The power converter may be used whether or not the

vehicles engine is running. However, the power converter

may not operate while the engine is starting because the

battery voltage can drop substantially during cranking.

Warning! Loose connectors may cause overheated wires

and melted insulation. Check to make sure you have not

reversed the polarity. Damage due to reversed polarity is not

covered by our guarantee.

Protective features of the power converter

Your appliance monitors the following potentially hazardous

conditions:

X Low voltage protection. This condition is not harmful

to the appliance but could damage the power source.

X The appliance will automatically shut down when the

input voltage drops to 10.5 +/- 0.5 Vdc. When the

conditions are corrected, reset the appliance by

removing and re-inserting the 12 Vdc accessory plug.

X Short circuit protection. A reverse polarity or short

circuit condition may cause external or internal fuses to

open and may cause irreversible damage to the

appliance. Take extra care to insure a correct polarity

connection.

X Overload protection. The power inverter will

automatically shut down when the continuous load

exceeds the rated wattage. When the overload is

removed, reset the appliance by removing the 12 Vdc

accessory plug and re-insert the 12 vdc accessory plug.

Hints for optimum use

For best results, the appliance should be placed on a flat

and/or solid surface. The appliance should only be used in

locations that meet the following criteria:

X DRY - Do not allow water or other liquids to come into

contact with the appliance.

X COOL - The surrounding air temperature should be

between 4°C and 40°C (39°F and 105°F). Ideally

between 15°C and 25°C (60°F and 80°F). Keep the

appliance away from direct sunlight, when possible.

X WELL VENTILATED - Keep the area surrounding the

appliance clear to ensure free air circulation.

X Do not place items on or over the appliance during

operation. The appliance will shut down if the internal

temperature gets too hot.

X SAFE - Do not use the appliance near flammable

materials or in any locations that may accumulate

flammable fumes or gases. This is an electrical

appliance that can briefly spark when electrical

connections are made or broken.

Troubleshooting

If the green LED indicator (3) is not lit:

X Check that all the dc connections are connected

correctly.

X Check the tightness of the dc connections.

Note: Make sure that your accessory outlet is live. You may

need to turn the ignition key to the accessory position.

If the red LED indicator (3) is lit, one of the following

conditions has occurred:

X Low voltage protection.

X Short circuit protection.

X Overload protection.

X Disconnect the appliance (if applicable).

Remove the 12 Vdc accessory plug, correct the fault and re-

insert the 12 vdc accessory plug.

Maintenance

Your Black & Decker tool has been designed to operate over

a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper

care and regular cleaning.

Warning! Before performing any maintenance or cleaning

on the appliance, unplug the appliance.

X From time to time wipe the appliance with a damp cloth.

Do not use any abrasive or solvent-based cleaner. Do

not immerse the appliance in water.

Replacing the fuse in the vehicle dc accessory plug

X Remove the cap by turning it counter clockwise.

X Remove the cap and centre pin.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker BDPC10USB Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info