16290
8
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
8
ENGLISH
Follow the instructions for maintenance and
changing accessories. Keep handles and
switches dry, clean and free from oil and grease.
20.Repairs
This tool complies with relevant safety
requirements. Repairs should only be carried
out by qualified persons using original spare
parts; otherwise this may result in considerable
danger to the user.
Additional safety instructions for angle grinders
Wear safety glasses or goggles when
operating this tool.
Wear ear protection when operating this
tool.
Wear gloves when operating this tool.
Do not cut or grind light metal with a
magnesium content exceeding 80%, since
this type of metal is flammable.
Only use grinding and cutting discs and other
accessories recommended in this manual.
Make sure that the maximum speed of the
grinding or cutting disc exceeds the no-load
speed of the tool.
Do not cut workpieces requiring a maximum
depth of cut exceeding that of the cutting disc.
Never use the tool without the guard, except
for sanding.
Do not exert side pressure on the grinding or
cutting disc.
Sanding
Preferably wear a dust mask whenever sanding.
Thoroughly remove all dust after sanding.
Take special care when sanding paint which is
possibly lead based or when sanding some
woods and metal which may produce toxic
dust:
- Wear a dust mask specifically designed for
protection against lead paint dust and fumes
and ensure that persons within or entering
the work area are also protected.
- Do not let children or pregnant women enter
the work area.
- Do not eat, drink or smoke in the work area.
- Dispose of dust particles and any other
debris safely.
ELECTRICAL SAFETY
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
This tool is double insulated in accordance
with EN 50144; therefore no earth wire is
required.
Mains plug replacement (U.K. & Ireland only)
Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorised
repair agent or a qualified electrician.
Disconnect the plug from the supply and
remove the fuse from the plug.
Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
The cable wire colours, or a letter, will be
marked at the connection points of most good
quality plugs. Attach the wires to their
respective points in the plug (see above).
Brown is for Live (L) (2), blue is for Neutral (N) (4).
Before replacing the top cover of the mains
plug ensure that the cable restraint (3) is
holding the outer sheath of the cable firmly
and that the leads are correctly fixed at the
terminal screws.
If the plug has a fuse cover, make sure that the
fuse cover is fitted.
SAG.P65 17-07-2001, 14:518
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Black Decker CD501 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Black Decker CD501

Black Decker CD501 Bedienungsanleitung - Deutsch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Deutsch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Englisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Englisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Englisch - 16 seiten

Black Decker CD501 Bedienungsanleitung - Holländisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Holländisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Dänisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Dänisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Französisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Französisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Italienisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Italienisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Portugiesisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Portugiesisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Spanisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Spanisch, Spanisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Schwedisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Schwedisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Norwegisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Norwegisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Finnisch - 76 seiten

Black Decker CD501 Bedienungsanleitung - Finnisch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info