Bedienungsanleitung Black Decker EMAX34 T3 (Seite 3 von 8) (Englisch)

585916

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

ENGLISH

(Original instructions)

u Move the lever towards the rear of the appliance to lower

the height of cut.

u Move the lever towards the front of the appliance to raise

the height of cut.

u Push the height adjustment lever (7) into one of the 6

height locations.

Note: The height of cut can be viewed on the height of cut

gauge (8) on the side of the unit.

Switching on and off (g. I)

Switching on

u Push in and hold the lock-off button (27).

u Pull the on/off switch (2) towards the handle.

u Release the lock-off button.

Switching off

u Release the on/off switch (2).

Warning: Never attempt to lock a switch in the on position.

Mowing (g. P1 & P2) (EMax38i & EMax42i only)

We recommend to use your mower as outlined in this section

in order to achieve optimum results and to reduce the risk of

cutting the mains cable.

u Loop the mains cable through the intelligent cable

management system (4) as shown (g. H) ensue that you

leave approximately 100 cm of cable between the switch-

box (1) and the intelligent cable management restraint (4).

u Ensure that the cable restraint can slide freely from one

handle to the other.

u Place the bulk of the mains cable on the lawn, close to the

starting point (position 1 in g. P1).

u Switch the appliance on as described above.

u Proceed as shown in g. P1

u Move from position 1 to position 2.

u Turn right, stepping over the cable and proceed towards

position 3. The cable restraint will slide from one side of

the handle to the other ensuring that the cable is laid out

away from the cutting blade.

u Turn left, stepping over the cable and move towards posi-

tion 4. The cable restraint will slide from one side of the

handle to the other ensuring that the cable is laid out away

from the cutting blade.

u Repeat the above procedure as required.

Warning: Do not work towards the cable as shown in g. P2.

Mowing (g. P1 & P2) (EMax34s & EMax34i only)

We recommend to use your mower as outlined in this section

in order to achieve optimum results and to reduce the risk of

cutting the mains cable.

u Place the bulk of the mains cable on the lawn, close to the

starting point (position 1 in g. P1).

u Switch the appliance on as described above.

u Proceed as shown in g. P1

u Move from position 1 to position 2.

u Turn right and proceed towards position 3.

u Turn left and move towards position 4.

u Repeat the above procedure as required.

Warning: Do not work towards the cable as shown in g. P2.

EdgeMax (g. K1 & K2)

EdgeMax allows you to cut grass right up to the edge of a wall

or fence (g K1).

EdgeMax allows you to accurately cut grass right up to the

edge of your lawn (g K2).

u With the lawnmower parallel with the edge of your lawn.

u Push the lawnmower along the edge of the lawn. Ensure

that the EdgeMax (9) is slightly over the edge of your lawn

(g.K2)

Note: The roller underneath the appliance provides stability

when mowing over the edge of your lawn.

Compact&Go (g. J) (EMax34i, EMax38i & EMax42i

only)

When the grass collection box is full you can compact the

grass in the collection box. You can determine how full the

grass collection box is by looking through the clear grass ap

(11).

u Release the on/off switch (2).

u Using your right foot, press the grass compaction lever

(29) all the way down until it locks into place.

Note: The grass in the collection box is now compressed into

the rear of the box. You may continue mowing until the grass

collection box becomes full.

Emptying the grass collection box (g. J) (EMax34i,

EMax38i & EMax42i only)

u Release the on/off switch (2).

u Remove the grass collection box (10).

u Empty the contents from the front of the box.

u Place the grass collection box on the ground and pull in

and hold the grass compaction lever release button (30).

u Lift the grass compaction lever (29) into the vertical

position and release the grass compaction lever release

button (30).

u Empty the contents from the rear of the box.

Emptying the grass collection box (EMax34s only)

When the grass collection box is full you should empty the

grass in the collection box.

u Release the on/off switch (2).

u Remove the grass collection box (10).

u Empty the contents from the box.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker EMAX34 T3 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker EMAX34 T3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info