527511
3
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
3
ENGLISH
Always keep the power supply cable away from
the machine - be aware of its position at all times.
Never carry your machine by the cable or jerk
the cable to separate the connectors. Keep the
cable away from heat sources, oils or sharp
edges. Check the condition of your cable before
use and do not use if damaged.
You can use an extension cable up to 40m
(130ft). This must be 2 core only, not lighter than
PVC sheathed flexible cord, code designation
H05VV-F, with 1.0mm
2
copper cross section.
For Australia/New Zealand use extension cords
complying to all regulations.
Clothing
Always wear gloves when operating the
shredder (H4).
We recommend the wearing of protective eye
glasses when operating the shredder (H2).
To protect your feet, always wear stout shoes
or boots.
Wearing shoes with rubber or man-made soles
will enhance your safety.
Do not use the shredder barefoot or in
open sandals.
Where long trousers to protect your legs.
Always use ear protection if the sound level (H3)
seems uncomfortable when using your machine.
Do not wear loose jewellery.
Protect long hair from contact with the shredder.
Safety of others
Do not allow children or any person who has not
read this instruction leaflet or who is not familiar
with the shredder to operate it.
Do not allow children, animals or other persons
near your machine when in use - always keep
them at least 6m (20ft) away from the shredder.
Remember that the operator/user is responsible
for accidents or hazards occuring to other
people or their property.
Working conditions
Ensure that the shredder is standing on firm
ground when in use.
Do not use your shredder in the rain or in
wet conditions (H7).
Use only in daylight or good artificial light.
Using your machine
Always be sure your machine is in a safe
operating condition.
Before using your machine, disconnect it from
the electrical supply and check that the blade,
blade bolts and cutter assembly are not worn or
damaged. Damaged blades and worn bolts are
major hazards and must be replaced.
ion Manual
Under no circumstances should you attempt to
turn your machine over on to its side whilst
running, or attempt to stop the blade - always
allow it to stop on its own. Do not put hands or
feet near or under rotating parts.
Never operate the shredder with defective
guards or shields (H6).
Replace worn or damaged parts for safety.
Do not look directly into the funnel or shredder
outlet while operating the shredder, as loose
debris may be ejected. We recommend the
wearing of protective eye glasses when
operating the shredder.
Under no circumstances put your hands in the
cutting area whilst the cutters are still rotating.
The blades will continue to rotate for a short
while after the machine is switched off.
Never start the shredder without the body and
large feeder funnel being securely attached.
Do not switch the motor off until the shredder is
completely empty, as it may clog and be difficult
to restart.
Ensure that no hard objects, e.g. metal, stones
or glass, come into contact with the blades.
Care of your machine
Store your machine in a dry place when not in
use, out of the reach of children.
Do not use solvents or cleaning fluids to clean
your machine - use a blunt scraper to remove
grass and dirt. Always disconnect from the
electrical supply before cleaning.
Do not operate your machine if any parts are
defective; discard all defective parts and fit new
parts before use.
Use only Black & Decker recommended
replacement parts and accessories.
Keep all nuts, bolts and screws tight to be sure
your machine is in a safe working condition.
Double insulation
Your machine is double insulated. This
means that all external metal parts are
electrically isolated from the power supply.
This is achieved by placing an extra
insulation barrier between the electrical and
mechanical parts. Double insulation means
greater electrical safety and obviates the
necessity of having the machine earthed.
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

black-decker-ga100

Suche zurücksetzen

  • Ich möchte die Messer wechseln. Wie kann man das Gehäuse abbauen? Eingereicht am 6-4-2020 11:01

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Black Decker GA100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info