Bedienungsanleitung Black Decker GD200 verticuteermachine (Seite 10 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

527514

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Symptoms Possible cause Remedy

Motor buzzes Tine assembly Disconnect from

but the tine jammed. the electrical

assembly does supply.

not move. Remove the

obstruction from

the tine assembly.

No noise and Faulty electrical Disconnect from

tine assembly connection. the electrical

does not move. supply.

Plug your raker

into an alternative

electrical supply.

Re-tighten and

check all the

electrical

connections in the

extension cables.

What to do if your raker needs repair

Information on how and where to send your raker for

repair or service is given on your guarantee card at

the back of this user manual.

Unwanted products and the

environment

Should you find one day that your raker

needs replacement, or is of no further

use to you, think of the protection of the

environment. Black & Decker service agents

will accept your old raker and will dispose of it

in an environmentally safe way.

Black & Decker lawn and garden

guarantee

This guarantee provides 36 months parts cover

and 12 months labour (UK), 24 months parts

cover and labour (Australia and New Zealand).

In all cases proof of purchase will be required.

lf your Black & Decker raker becomes defective,

within the guarantee period, due to faulty materials

and workmanship, we guarantee to either replace all

defective parts, or at our discretion, replace your

raker free of charge, provided that:

• Your raker is returned to one of our authorised

repair agents with evidence of purchase.

• Your raker has been used within the parameters

of its consumer classification.

• Your raker has not been used for hire purposes.

• Repairs have not been attempted by anyone

other than our authorised repair agents.

• The failure represents normal wear and tear.

This guarantee is offered as an extra benefit and is

additional to your statutory rights.

• Remove the spring clip (50) and

withdraw the tine assembly (3).

• When re-assembling the parts, ensure

that the cover (48) is located correctly at

each corner where it fits into your raker

body (1), then refit the two screws (47) to

secure it in place (Fig. G1).

Handy hints

• Do not force your raker through grass that is too

long. It is recommended that your raker should

not be used in grass that is longer that 75mm

(3 inches) in length.

• Do not use in wet or damp conditions.

• To obtain the best result from your raker use it

regularly. It is recommended that your raker is

used at the beginning and end of each grass

cutting season to give your lawn a thorough

scarifying. Your raker should also be used after

each mowing session to remove any grass

cuttings that may have been left behind by

your raker.

• Rake first in one direction and then at the next

occasion at right angles. Initially, this may make

the grass look bare and straggly but it will

rapidly recover.

Care and maintenance

Warning! Do not use an extension cable

which shows signs of damage. Fit a new

cable completely - do not make any

permanent or temporary repairs.

• Always keep your raker clean and free

from grass cuttings, especially the motor

vents on the side of your raker body.

• Check all electrical cables at regular

intervals, looking for signs of wear,

abrasion or other damage.

• At the end of each raking session we

recommend that the build up of grass on

the tone assembly is removed using a

blunt scraper.

• Clean all plastic components with a

damp cloth and all metal components

with a soft, dry cloth.

Caution: Do not use solvents or cleaning

fluids as these may damage the plastic

components of your raker.

Fault finding

If your raker does not operate correctly, use

the following table to locate the problem.

Warning! Always disconnect your raker from

the electrical supply before carrying out any

inspection.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GD200 verticuteermachine Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info