Bedienungsanleitung Black Decker kc 360 hf (Seite 5 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

381453

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

ENGLISH

Generally, a charging time of 4 hours will enable the tool to

operate at an effective power level for most tasks.

However, further charging for up to 8 hours could significantly

increase the run time, depending on the battery and charging

conditions.

◆ Before using the tool, unplug the charger and disconnect

the tool from the charger.

Warning! Do not use the tool while it is connected to the

charger.

Warning! Do not charge the battery at ambient temperatures

below 4 °C or above 40 °C.

Selecting the direction of rotation (fig. C)

For tightening screws, use forward (clockwise) rotation.

For loosening screws use reverse (counterclockwise) rotation.

◆ To select forward rotation, push the forward/reverse

slider (2) to the forward position.

◆ To select reverse rotation, push the forward/reverse slider

(2) to the rearward position.

◆ To lock the tool, set the forward/reverse slider into the

centre position.

Screwdriving (fig. C)

◆ Select forward or reverse rotation using the forward/

reverse slider (2).

◆ To switch the tool on, press the on/off switch switch (1).

◆ To switch the tool off, release the on/off switch (1).

Spindle lock

This tool is fitted with an automatic spindle lock so that it can

be used as a normal screwdriver. Use the tool this way to

loosen very tight screws or to firmly tighten screws.

Hints for optimum use

◆ Always use the correct type and size of screwdriver bit.

◆ If screws are difficult to tighten, try applying a small

amount of washing liquid or soap as a lubricant.

◆ Use the spindle lock to loosen very tight screws or to

firmly tighten screws.

◆ Always hold the tool and screwdriver bit in a straight line

with the screw.

◆ When screwing in wood, it is recommended to drill a pilot

hole with a depth equal to the length of the screw. A pilot

hole guides the screw and prevents splintering or

distortion of the wood. For the optimum size of the pilot

hole, refer to the table below.

◆ When screwing in hardwood, also drill a clearance hole

with a depth equal to half the length of the screw. For the

optimum size of the clearance hole, refer to the table

below.

Screw size Pilot hole ø Pilot hole ø Clearance

(softwood) (hardwood) hole

No. 6 (3.5 mm) 2.0 mm 2.5 mm 4 mm

No. 8 (4 mm) 3.2 mm 3.5 mm 5.0 mm

No. 10 (5 mm) 3.5 mm 4.0 mm 5.7 mm

Accessories

The performance of your tool depends on the accessory used.

Black & Decker and Piranha accessories are engineered to

high quality standards and designed to enhance the performance

of your tool. By using these accessories you will get the very

best from your tool.

This tool uses screwdriver bits with a 1/4" (6.35) hexagonal

shank. Piranha Super-lok accessories are designed for use

with this tool.

Maintenance

Your Black & Decker tool has been designed to operate over a

long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool

care and regular cleaning.

Your charger does not require any maintenance apart from

regular cleaning.

Warning! Before performing any maintenance on the tool,

remove the battery from the tool. Unplug the charger before

cleaning it.

◆ Regularly clean the ventilation slots in your tool and

charger using a soft brush or dry cloth.

◆ Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker kc 360 hf Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info