78925
7
Zoom out
Zoom in
Vorherige Seite
1/104
Nächste Seite
7
ENGLISH
Before operating the tool,
make sure that you know
how to switch the tool off
in an emergency.
Retain this manual for
future reference.
General
1. Keep work area clean
Cluttered areas and benches
can cause accidents.
2. Consider work area
environment
Do not expose the tool to
rain. Do not use the tool in
damp or wet conditions.
Keep the work area well lit.
Do not use the tool where
there is a risk of causing fire
or explosion, e.g. in the
presence of flammable liquids
and gases.
3. Keep children away
Do not allow children, visitors
or animals to come near the
work area or to touch the tool.
4. Dress properly
Do not wear loose clothing or
jewellery, as these can be
caught in moving parts.
Preferably wear rubber gloves
and non-slip footwear when
working outdoors. Wear
protective hair covering to
keep long hair out of the way.
5. Personal protection
Always use safety glasses.
Use a face or dust mask
whenever the operations may
produce dust or flying
particles. Wear ear protection
whenever the sound level
seems uncomfortable.
6. Do not overreach
Keep proper footing and
balance at all times.
7. Stay alert
Watch what you are doing.
Use common sense. Do not
operate the tool when you
are tired.
8. Secure workpiece
Use clamps or a vice to hold
the workpiece. It is safer and
it frees both hands to operate
the tool.
9. Connect dust extraction
equipment
If devices are provided for the
connection of dust extraction
and collection facilities,
ensure that these are
connected and properly used.
10.Remove keys and adjusting
wrenches
Always check that keys and
adjusting wrenches are
removed from the tool before
operating the tool.
11.Use appropriate tool
The intended use is described
in this instruction manual.
Do not force small tools or
attachments to do the job of
a heavy-duty tool. The tool
will do the job better and
safer at the rate for which it
was intended. Do not force
the tool.
Warning! The use of any
accessory or attachment or
performance of any operation
with this tool other than those
recommended in this
instruction manual may present
a risk of personal injury.
12.Check for damaged parts
Before use, carefully check
the tool for damage.
Check for misalignment and
seizure of moving parts,
breakage of parts, damage to
guards and switches and any
other conditions that may
affect its operation.
Ensure that the tool will
operate properly and perform
its intended function.
Do not use the tool if any part
is damaged or defective.
Do not use the tool if the
switch does not turn it on and
off.
KC9036EUR.PM65 25-06-2001, 14:537
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Black Decker KC 9039 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info