Bedienungsanleitung Black Decker KD980K (Seite 6 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

602308

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

ENGLISH

Hammer drilling

◆ For hammer drilling in masonry and concrete, set the

operating mode selector (5) to the position

◆ When hammering, the tool should not bounce and run

smoothly. If necessary, increase the speed.

Chiselling

◆ For chiselling with spindle lock and for light chipping, set

the operating mode selector (5) to the

position.

◆ Make sure the forward/reverse switch is in the forward

position.

◆ When changing from hammer drilling to chiselling,

turn the chisel to the desired position. If resistance is felt

during mode change, slightly turn the chisel to engage the

spindle lock.

Selecting the direction of rotation

For drilling, for tightening screws and for chiselling, use

forward (clockwise) rotation. For loosening screws or removing

a jammed drill bit, use reverse (counterclockwise) rotation.

◆ To select forward rotation, push the forward/reverse

slider (3) to the left.

◆ To select reverse rotation, push the forward/reverse slider

to the right.

Warning! Never change the direction of rotation while the

motor is running.

Setting the drilling depth (fig. G)

◆ Slacken the side handle (6).

◆ Set the depth stop (7) to the desired position. The maximum

drilling depth is equal to the distance between the tip of

the drill bit and the front end of the depth stop.

◆ Tighten the side handle (6).

Switching on and off

◆ To switch the tool on, press the variable speed switch (1).

The tool speed depends on how far you press the switch.

◆ For continuous operation, press the lock-on button (2) and

release the variable speed switch. This option is available

only in forward (clockwise) rotation.

◆ To switch the tool off, release the variable speed switch.

To switch the tool off when in continuous operation,

press the variable speed switch once more and release it.

Accessories

The performance of your tool depends on the accessory used.

Black & Decker and Piranha accessories are engineered to

high quality standards and designed to enhance the performance

of your tool. By using these accessories you will get the very

best from your tool.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

◆ Regularly clean the ventilation slots with a clean,

dry paint brush.

◆ To clean the tool, use only mild soap and a damp cloth.

Never let any liquid get inside the tool and never immerse

any part of the tool into liquid.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

◆ Safely dispose of the old plug.

◆ Connect the brown lead to the live terminal in the new plug.

◆ Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality

plugs. Recommended fuse: 5 A.

Protecting the environment

Black & Decker provides a facility for recycling

Black & Decker products once they have reached the

end of their working life. This service is provided

free of charge. To take advantage of this service

please return your product to any authorised repair

agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of our

after-sales service and contacts are available on the Internet

at: www.2helpU.com

Technical data

KD970 KD980

Voltage V

230 230

Power input W 600 650

No-load speed min

-1

0 - 1,000 0 - 1,000

Load speed min

-1

0 - 820 0- 820

Impact rate min

-1

0- 4,000 0- 4,000

Impact energy J 2.0 2.2

Tool holder SDS-plus

SDS-plus

Max. drilling capacity

Concrete mm 22 24

Steel mm 13 13

Wood mm 30 30

Core drilling capacity in soft brick mm - 65

Chiselling no yes

Weight kg 2.3 2.3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KD980K Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info