Bedienungsanleitung Black Decker ks 66 l qs (Seite 9 von 12) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

383710

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

◆ Work with the shoe pressed against the workpiece.

Hints for optimum use

◆ As some splintering along the line of cut on the top side

of the workpiece cannot be avoided, cut on the side

where splintering is acceptable.

◆ Where splintering is to be minimised, e.g. when cutting

laminates, clamp a piece of plywood onto the top of the

workpiece.

Using the sight guide (fig. G)

The tool is equipped with a sight guide for straight cutting (27)

and for 45° mitre cutting (28).

◆ Adjust the sight guide as described below.

◆ Align the left edge of the guides (27) or (28) with the

cutting line (29).

◆ Keep the sight guide aligned with the cutting line while

sawing.

◆ Work with the shoe pressed against the workpiece.

Adjusting the sight guide

◆ Make a test cut halfway through a piece of scrap wood.

◆ Withdraw the saw so the cutting line (29) becomes visible.

◆ While keeping the saw in this position, loosen the sight

guide on the saw shoe as shown.

◆ Align the 0° mark (27) on the sight guide with the cutting

line (29). When adjusting for 45° mitre cuts, align the 45°

mark (28) on the sight guide with the cutting line.

◆ Secure the sight guide using the screw (30).

How to use the laser (fig. H)

The laser projects the line of cut on the workpiece surface.

◆ To switch the laser on, press the button (6).

◆ To switch the laser off, press the button (6) again.

Viewing from directly above the saw, the line of cut can be

easily followed. Should this view be restricted for any reason,

the laser can be used as an alternate cutting guide.

◆ Use a pencil to mark the cutting line.

◆ Position the saw over the line.

◆ Switch on the laser.

Dust extraction

An adaptor is required to connect a vacuum cleaner or dust

extractor to the tool.

◆ Insert the dust extraction adaptor into the saw dust outlet

(12).

◆ Connect the vacuum cleaner hose to the adaptor.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

◆ Regularly clean the ventilation slots with a clean,

dry paint brush.

◆ To clean the tool, use only mild soap and a damp cloth.

Never let any liquid get inside the tool and never immerse

any part of the tool into liquid.

Replacing the batteries (fig. I)

◆ Open the battery cover (31).

◆ Remove the old batteries.

◆ Place the new batteries as indicated.

◆ Refit the cover.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

◆ Safely dispose of the old plug.

◆ Connect the brown lead to the live terminal in the new plug.

◆ Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the fitting instructions supplied with good quality plugs.

Recommended fuse: 5 A.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you find one day that your Black & Decker product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product

available for separate collection.

Separate collection of used products and packaging

allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand for

raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this service

please return your product to any authorised repair agent who

will collect them on our behalf.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker ks 66 l qs Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info