Bedienungsanleitung Black Decker KS1880EC T1 (Seite 4 von 8) (Englisch)

581144

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

g. Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed. Use of the power tool

for operations different from those intended could result

in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety instructions for hand-held saws

◆ Warning! Contact with or inhalation of dusts arising

from cutting applications may endanger the health of the

operator and possible bystanders. Wear a dust mask

specifically designed for protection against dust and

fumes and ensure that persons within or entering the

work area are also protected.

◆ Do not use the tool for purposes not intended, for

example, do not cut tree limbs or logs.

◆ Always use the appropriate type of saw blade for the

workpiece material and type of cut.

◆ Only use saw blades in perfect condition.

◆ Always switch the tool off and wait for the saw blade to

come to a complete standstill before putting the tool down.

◆ When not in use, the tool should be put down on its side.

◆ Keep your hands well clear of the saw blade while working.

◆ Whenever possible, use clamps or a vice to secure the

workpiece.

◆ Before use, make sure that the cutting area is free of

obstacles, especially on the reverse side of the cut.

◆ Before sawing in walls or floors, be aware of the location

of hidden pipes and wiring.

◆ Do not use the tool while in a tree, on a ladder or on any

other unstable surface.

Electrical safety

This tool is double insulated; therefore no earth wire

is required. Always check that the power supply

corresponds to the voltage on the rating plate.

◆ This appliance is not intended for use by young or infirm

persons without supervision. Children must be supervised

to ensure they do not play with the appliance.

◆ If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Variable speed switch

2. Lock-off button

3. Blade release button

Assembly

Warning! Before assembly, make sure that the tool is switched

off and unplugged.

Fitting and removing a saw blade (fig. A - C)

Saw blade

4. Large capacity blade

Fitting

◆ Place the blade over the location pin (5).

◆ Rotate the blade upward through 90° until it is fully

located in the saw blade slot (6) and the location pin is in

the locked position.

◆ Make sure the blade is securely fitted by trying to remove

it without depressing the blade release button (3).

If you are unable to fit the blade, check if the location pin is in

the correct position as shown in fig. C. If it is not, keep the

blade release button depressed and use a screwdriver to turn

the location pin into the correct position.

Removing

◆ Keep the blade release button (3) depressed and rotate

the blade downward through 90°.

◆ Take the blade sideways off the location pin and slide it

out of the tool.

◆ Release the blade release button.

Use

Warning! Let the tool work at its own pace. Do not overload.

◆ Do not touch the saw blade immediately after the

operation as it might be hot.

Switching on and off (fig. D)

◆ To switch the tool on, push the two lock-off button (2) into

the unlock position and squeeze the variable speed switch

(1).

◆ To switch the tool off, release the variable speed switch.

Sawing (fig. E)

◆ If possible, always hold the tool with both hands.

◆ Let the blade run freely for a few seconds before starting

the cut.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker KS1880EC T1 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker KS1880EC T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info