Bedienungsanleitung Black Decker SZ360 T1 (Seite 6 von 12) (Englisch)

578039

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

X To exchange cutting heads, grasp the scissors as shown in

figure A with fingers at the side of the cutting head and the

hand away from the blades.

X Press in on the sides of the cutting head and pull straight

out.

X To attach a cutting head, line it up with the body of the

scissors and push it on until it snaps into place. If the

cutting head does not line up easily, carefully separate the

blades from each other first then re-attach.

Protecting the environment

Should you find one day that your appliance needs

replacement, or if it is of no further use to you,

think of the protection of the environment. Black &

Decker repair agents will accept old Black &

Decker tools and ensure that they are disposed of

in an environmentally safe way.

Separate collection of used products and

packaging allows materials to be recycled and

used again. Re-use of recycled materials helps

prevent environmental pollution and reduces the

demand for raw materials.

Local regulations may provide for separate collection of

electrical products from the household, at municipal waste

sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and

recycling of Black & Decker products once they have reached

the end of their working life. To take advantage of this

service please return your product to any authorised repair

agent who will collect them on our behalf.

You can check the location of your nearest authorised repair

agent by contacting your local Black & Decker office at the

address indicated in this manual. Alternatively, a list of

authorised Black & Decker repair agents and full details of

our after-sales service and contacts are available on the

Internet at: www.2helpU.com.

Batteries

Black & Decker batteries can be recharged many

times. At the end of their useful life, discard

batteries with due care for our environment:

Run the battery down completely, then remove it from the

tool.

NiCd batteries are recyclable. Take them to any authorised

repair agent or a local recycling station.

Technical data

EC declaration of conformity

SZ360

Black & Decker declares that these products conform to:

Standards & Legislation.

98/37/EC, 89/336/EEC, 73/23/EC, EN60745, EN60335,

EN55014, EN50336

LpA (sound pressure) 77.1 dB(A),

LWA (acoustic power) 88.1 dB(A),

hand/arm weighted vibration 1.5 m/s2

KpA (sound pressure uncertainty) 3 dB(A),

KWA (acoustic power uncertainty) 3 dB(A)

Kevin Hewitt

Director of Consumer Engineering

Spennymoor, County Durham

DL16 6JG,

United Kingdom

31-09-2006

SZ360

Voltage Vdc 3.6

No-load speed min-1 9000

Weight kg 0.3

Charger

Input voltage Vac 230

Frequency Hz 50

Approx. charging time h 12

Charging current mA 140

Weight kg 0.2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker SZ360 T1 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker SZ360 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info