Bedienungsanleitung Blaupunkt AHS803 (Seite 8 von 108) (Deutsch, Englisch, Polnisch)

698431

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

1. Body

2. Water tank

3. Display with control panel

4. Filter with valve

5. Water-mist outlet

6. Aromatherapy attachment

7. Air-filter cover

8. HEPA H13 air filter

USING THE AIR HUMIDIFIER

1. Remove the water tank (2) from the device body (1), unscrew the filter valve (4), and fill the tank (2)

with water. Tighten the water tank (2) along with the filter (4). Place the water tank (2) in the body of

the device (1).

2. Make sure the water-mist-outlet nozzle (5) is well seated in the appliance.

3. Connect the appliance to a suitable power source. The display lights up for a moment, then turns off,

and the device goes into standby mode.

WARNING: When the water tank is empty, the "empty water tank" indicator will appear on the display

and the humidifier will stop working. Fill the water tank to continue operation.

BUTTON DESCRIPTIONS

Switch:  When the push-button is pressed, the humidifier will emit a water mist and the operating

parameters can be checked on the LED display. Press this button again to return to standby mode.

Humidification intensity:  The humidification intensity can be adjusted in three steps by

pressing this button.

Night mode:  Press this button to start the night mode; the display turns off, and the humidifier

goes into automatic mode.

Warning: A long press of the button (3 seconds) will turn off the sounds associated with pressing the

function keys. To restore the sounds, hold the button down again.

Humidistat / AUTO mode:  A short press of the button activates the constant-humidity mode. Each

press changes the target moisture value from 40% to 80% RH. The humidifier will start and stop the

humidification of air oscillating around the selected air humidity. When the humidistat mode is

started, the humidifier will operate for the first two minutes, regardless of the ambient humidity.

A long press of the button (3 seconds) will start the automatic mode. The automatic mode will

maintain a humidity of 55% ~ 68% by adjusting the humidification intensity to the ambient conditions.

Negative ions:  Short press of button: Turns on/off the negative ion generator. Long press of the

button: Turn off the humidification process, keep the fan running for purification process.

Timer / UV lamp:  A short press of the button launches the timer; each press sets the time to turn off

the device from 1 to 10 hours.A long press of the button (3 seconds) turns on or off the internal UV

lamp for air sterilisation.

Hot mist:  Pressing the button starts the water-mist heating. To turn off the water-mist heating,

press the button again.

THE LED DISPLAY

When the "%" symbol lights up, the display shows the relative humidity of the air.

When the "℃" symbol lights up, the display shows the current ambient temperature.

AHS802/AHS803



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt AHS803 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info