Bedienungsanleitung Blaupunkt Barcelona CM102 (Seite 7 von 15) (Englisch)

614666

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Barcelona CM 102

Amplifier Section

ON/OFF

For switching the set on,

● turn button 1 clockwise and

● insert the KeyCard completely.

Your stereo is now ready for operation.

For switching the set off,

● turn button 1 counterclockwise or

● remove the KeyCard C.

First press on the KeyCard (to release

it) and then take it out of the slot.

Balance and Fader

With two loudspeakers installed, you can

balance the sound impression left/right; with

four speakers available, you can also adjust

the sound pattern of the front and rear level

(fader).

The balance and fader function is activated

by pressing the GEO button 2.

Balance

For balancing the sound level left/right:

● Press the GEO button 2.

The display B a gives you BAL (Ba-

lance) or FAD (Fader) plus a number

between -9 and +9.

● Press the rocker switch <</>> D left/

right. The sound of the left and right

channel is balanced; the number on the

display changes between -9 and +9.

The display indication automatically

stops at “0” (= sound of the left and

right channel is balanced).

Fader

For balancing the sound level front/rear (Fa-

der):

● Press the GEO button 2.

The display B a gives you BAL (Ba-

lance) or FAD (Fader) plus a number

between -9 and +9.

● Press the rocker switch

/ E up/

down. The sound of the front and rear

channel is balanced; the number on the

display changes between -9 and +9.

The display indication automatically

stops at ‘“0” (= sound of the front and

rear channel is balanced).

The adjustment is terminated by pressing the

GEO button 2 once again; otherwise, the

display will automatically return to indication

of radio or tape functions approx. eight se-

conds after the last setting has been carried

out.

Controlling Treble and Bass

Treble Control

For controlling the high frequencies:

● Press the TREB button 3.

The display B a gives you TRE and a

number between -6 and +6.

● Press the rocker switch <</>> D to the

right for boosting the treble or to the left

for treble reduction.

The number on the display changes

between -6 and +6. It will automatically

stop at the “0” position (normal).

Bass Control

For controlling the low frequencies:

● Press the BASS button 3.

The display B a gives you BAS and a

number between -6 and +6.

● Press rocker switch <</>> D to the

right for boosting the basses or to the

left for bass reduction.

The number on the display changes

between -6 and +6. It will automatically

stop at the “0” position (normal).

The treble and bass adjustment is termina-

ted by pressing the BASS or TREB button 3

once again; otherwise, the display will auto-

matically return to indication of radio or tape

functions approx. eight seconds after the last

setting has been carried out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt Barcelona CM102 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt Barcelona CM102

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info