496871
45
Zoom out
Zoom in
Vorherige Seite
1/49
Nächste Seite
Operating instruction
A. Switch On/Off and pairing the product
1. Before turning on the system, please connect it according to the System Connection
Instruction.
2. Connect AC power supply with this product.
(Caution: Power source must be consistent with this product.)
3. Press on the power switch button on the Rear Panel of the main unit to power on the
system, Press it once again to power off the unit.
B. Volume
1. Press the Volume + button on the front panel of the main unit or VOL + button on the
remote controller to increase the volume of system.
2. Press the Volume - button on the front panel of the main unit or VOL - button on the
remote controller to decrease the volume of system.
C. Subwoofer Speaker
1. Press SW + button on the remote controller to increase the volume of subwoofer.
2. Press SW - button on the remote controller to decrease the volume of subwoofer.
D. Front Speaker
1. Press FRONT + button on the remote controller to increase the volume of Front Speaker.
2. Press FRONT - button on the remote controller to decrease the volume of Front Speaker.
E. Center Speaker
1. Press CEN + button on the remote controller to increase the volume of Center Speaker.
2. Press CEN - button on the remote controller to decrease the volume of Center Speaker.
F. Surround Speaker
1. Press SURR + button on the remote controller to increase the volume of Rear Speaker.
2. Press SURR - button on the remote controller to decrease the volume of Rear Speaker.
G. Surround effects and PCM Decoder
1. Connect and place the whole system properly accord to connection instruction.
2. Select the MODE button as 5.1ch output.
3. If the input connection is from analog 5.1ch, then the system will decode as surround
effects.
4. If the input connection is from coaxial/optical/stereo with PCM signal, then the PCM
decoder will workable; you also can switch to 5.1ch output, and get surround sound
effects output.
4. When you start to play the system, please make sure the distance between the rear
surround speaker and subwoofer should less than 15M, because of wireless transmission.
5.When you switch on the power of subwoofer and rear speaker, the rear speaker will auto
detect and pairing with subwoofer. Please check the pairing status before you play them.
LS 255
45
45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Blaupunkt LS255 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info