Bedienungsanleitung Blaupunkt nevada rd 148 (Seite 23 von 28) (Englisch)

165724

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

The individual steps you have to take to

make these settings are described in the

table.

Notes on making the settings

The following notes are intended as recom-

mendations only. They do not necessarily

reflect your own personal sound preferenc-

es.

We recommend that you use a music CD

you are familiar with to make the settings.

The CD should include tracks with different

instruments and vocals. Purely electronic

music is not well suited to serve as a basis

for making the settings because the original

sounds cannot be determined.

Before you set the equaliser, set bass, tre-

ble, balance and fader to “0”.

This setting is described in the Quick Refer-

ence under A AUD.

Now listen to the CD you have selected.

Evaluate the sound according to your own

personal preferences.

Now refer to “Sound impression/problem” in

the table and you will find suggestions to

eliminate any problems under “What to do”.

Make the settings for bass and the lower

mid-range tones with the LOW EQ filter.

Setting the equaliser

The acoustic characteristics of the car inte-

rior affect the quality of the sound repro-

duced in your vehicle to a much greater ex-

tent than the speakers.

Position, installation and the rear volumes

of, for example, the door or rear window

shelf all play an important role.

Even the sound produced by well selected

and installed speakers can be affected neg-

atively by resonance frequencies in the ve-

hicle interior.

As a result, the bass sounds may be lost or

reverberate, the mid-range tones sound too

overpowering and music instruments or

voices may be distorted or the total sound

quality may be completely lifeless.

The overall sound quality can be greatly

enhanced if certain frequencies are sup-

pressed or boosted.

This car stereo is equipped with a paramet-

ric “LOW EQ” filter, which can be set from

50 to 200 Hz. In this context, parametric

means that it is possible to set the frequen-

cy and either boost or reduce it (+10 to

–20 dB) individually for this filter.

This parametric filter can be adjusted to very

exact settings even without the help of

measuring instruments.

The “LOW EQ” filter can be set in the DSC

menu:

• Press DSC.

• Press

/ as often as necessary until

“LOW EQ” appears in the display.

• Press << or >> once and

• Set the level in the following table by

pressing

/ .

• Press << >> to switch the frequency

range.

• Press

to store your settings.

You can switch the equaliser on and off by

pressing AUD for approximately 2 seconds.

Now you can compare the sound produced

by your car stereo with and without the

equaliser.

Setting recommendations on the

Internet

Refer to our home page on the Internet

http://www.blaupunkt.de

to find setting recommendations for new

vehicles on the market.

Lausa/Neva RD 148 gb® 21.05.2002, 17:16 Uhr49

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt nevada rd 148 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt nevada rd 148

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info