Bedienungsanleitung Blaupunkt VERONA CR 43 (Seite 6 von 13) (Englisch)

614794

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Verona CR 43

DEUTSCH

ENGLISH

ITALIANO

PORTUGUES

NEDERLAND

ESPAGÑOL

SVENSKA

FRANÇAIS

Important information

What you need to know!

Before starting to use your new car radio you

should carefully read through the information

on “Traffic safety” and “Anti-theft coding”.

Traffic safety

Traffic safety has always priority. Use your

car radio in such a manner that you are

always able to cope with and react to the

prevailing traffic situation at any given time.

Remember, even at 50 km/h you are still

moving at a speed of 14 m per seconds.

It is also very important that you are able to

hear, and react to, acoustic warning signals

around you, for example from the police or

the firebrigade.

Therefore, adjust the volume reasonably.

QuickOut

Only for car radios with QuickOut.

Using the QuickOut handle you can easily

pull your radio out of the installation compart-

ment to take it along. The preset stations

remain stored for a longer time.

To take out the radio.

• press knob ;, take the handle D and

pull the unit out.

Anti-theft coding

The car radio comes standard with the code

system deactivated.

If the anti-theft coding system is on while the

power supply to the unit is interrupted (e.g.

theft, disconnecting the car battery), the set is

electronically blocked. Then it may only be

used again after the appropriate code num-

ber has been entered (see car radio pass-

port).

Wrong code number entered

It should not be possible for thieves to ascer-

tain the code number by trial-and-error. This

is why the set will be blocked for a certain

period of time, if an incorrect code number is

entered. In this case, “- - -” will appear in the

display.

This waiting time is 10 seconds after the first

three attempts, and 1 hour following subse-

quent attempts.

After 19 unsuccessful attempts, “OFF” will

appear in the display and the set can no

longer be restarted.

Note:

Keep you car radio passport with the code

number in a safe place in order to avoid

“unauthorized access” to your car radio.

To listen to the radio or cassette again,

• insert the set into the compartment until

it stops and move the handle back to

the front panel.

If the coding system is off, your set will be

ready for operation.

If the coding system is on, proceed as des-

cribed under “Restart following interruption

of power supply”.

Installation/connection

The code system can only be switched on

and off, if the radio is connected to perma-

nent power.

If you like to install your new car radio by

yourself or add other audio components to

the existing ones, then please read carefully

the enclosed instructions on installation and

connection.

Do not connect the loudspeaker outputs to

ground!

Only use the accessory and replacement

parts approved by Blaupunkt.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blaupunkt VERONA CR 43 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blaupunkt VERONA CR 43

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info