Bedienungsanleitung Blendtec CHEF 775 (Seite 3 von 19) (Englisch)

626841

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

1.7 NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT

SOLD BY BLENDTEC

The use of any unauthorized attachments may cause ﬁre, electric shock, and/or

injury and will void the warranty�

1.8 BLENDER JAR MUST BE PROPERLY IN PLACE WHILE

APPLIANCE IS OPERATING

1.9 USE CAUTION WHEN BLENDING HOT LIQUIDS

Your Commercial series blender may have a vented lid that acts as a pressure

relief to allow steam to escape� Be careful not to come in contact with any steam�

1.10 POWER CORD PRECAUTIONS

• NEVER operate with a damaged cord or plug� If the supply cord is damaged it

must be replaced by the manufacturer or authorized service agent to avoid

a hazard�

• DO NOT permit the cord to hang over the edge of the work surface�

• NEVER use an extension cord with the unit�

• Unplug the blender motor when not in use, before changing blender locations,

or when cleaning�

EACH POWER UNIT MUST BE PROTECTED BY A SEPARATE CIRCUIT BREAKER

OR FUSE, SEE MODEL FOR SPECIFICATIONS

1.11 NEVER ATTEMPT TO REPAIR THE POWER UNIT

Never remove the blender motor cover� The blender motor does not contain user-

adjustable or serviceable parts� A qualiﬁed service agent must make all service

adjustments� Removing the cover or attempting to service the blender will void

the warranty�

1.12 TURN THE BLENDER OFF WHEN NOT IN USE

1.13 AVOID TOUCHING THE BLENDER DRIVE SOCKET OR JAR

SHAFT AFTER USE!

The blender drive socket and jar shaft may become very hot after blend cycles�

1.14 SAFETY

This appliance is not intended for use by persons (including children) with lack of

experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety� Children

should be supervised to ensure that they do not play with the appliance�

1.15 NEVER OPERATE THE BLENDER WITH MORE THAN THE

MARKED CAPACITY OF THE JAR

SECTION 2: UNPACKING

SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE

2.1 UNPACKING YOUR BLENDER

You should have received the following items:

• Commercial series blender motor base

• One or more blender jars with lid and sound enclosure*

• Additional literature may be included depending on package conﬁguration�

*Sound enclosure is available only on the Stealth 875™, Stealth 885™ and

Connoisseur 825™ models�

1� Remove blender motor base, blender jar, lids and sound enclosure (if included

with model) from packaging�

2� Unwind the power cord�

3� Check for any packing material that may have blocked ventilation holes on the

underside of the blender motor base�

4� Inspect all items to ensure no damage occurred during shipment�

5� If any damage has occurred, contact your Blendtec service agent immediately�

2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE

Record your blender motor serial number and date of purchase in the space

below� You will need these when contacting Blendtec for service or questions�

Motor Serial # (Found on bottom of motor base):_______________________

Date of Purchase: ____________________________________________

Purchased From: _____________________________________________

2.3 REGISTERING YOUR BLENDER

SECTION 3: GETTING TO KNOW YOUR BLENDER

3.1 BLENDER MOTOR BASE

• Smart Touch Interface: Varying models consist of preprogrammed cycles,

incremental speed cycles, timed cycles, a Stop button and a Pulse button�

• Hardened Metal Drive Socket: This is where the jar couples with the motor to turn

the blade assembly; made of hardened metal�

• Information Center: This displays the number of times a blend cycle button has

been pressed� It also indicates overload or over-temperature conditions�

• Power Unit: This unit is located within the blender motor base and contains the

computerized electronics that run the blender�

• Motor Base Cover: Houses the power unit in a durable, plastic material�

• Power Cord: The power cord is located at the back of the motor base cover�

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blendtec CHEF 775 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blendtec CHEF 775

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info