Bedienungsanleitung Blendtec TotalBlender (Seite 9 von 11) (Englisch)

626834

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

1312

• Blender Motor: Remove the pitcher and press the Ice Crush or Soup button.

Listen to how the motor sounds� If it is excessively noisy, contact your

Blendtec service center for evaluation�

• Jar: After checking the motor, place the jar back on the motor. Run the

motor for a few seconds using the Pulse button� (If you have more than one

jar, test a different jar to determine whether the sound is different�) If a jar is

exces sively noisy, or if the blade assembly seems loose or sounds “gravelly”

when turned by hand, contact your Blendtec service center�

7.4 BLENDED TEXTURE UNSATISFACTORY

If the blended texture of product is lumpy or uneven, do the following:

• Ensure the mixture is not cavitating during the cycle. Cavitation is a condition

in which an air pocket forms within the drink mix because the mix is too

cold or too solid� The blender blade then spins freely in this cavity� This prob-

lem can be corrected by increasing the mix temperature by either reducing

ice, increasing liquid and/or ensuring that the frozen ingredients used in the

recipe are never colder than 10 degrees Fahrenheit (-12 degrees Celsius)�

• If the drink is mixing well but has not had enough time for complete blending,

increase cycle time. Try a longer cycle or touch and hold the “Pulse” button

for the required extra blending time�

• TRIED EVERYTHING? If none of the preceding suggestions work, contact

your Blendtec service agent for further assistance�

INSTRUCTIONS THAT APPEAR IN THIS USER GUIDE ARE NOT MEANT TO

COVER EVERY POSSIBLE CONDITION OR SITUATION THAT MAY OCCUR.

GOOD JUDGMENT MUST BE USED WHEN OPERATING THIS OR ANY

OTHER MACHINERY.

SECTION 8: WARRANTY US AND CANADA

WARRANTY DESCRIPTION (US Domestic and Canada)

The motor base and jar assembly, including all moving jar parts, are covered

against leaking or breakage for the warranty period. Warranties begin from date

of purchase�

Cosmetic damage, product abuse, unreasonable use, damage resulting from

an accident (including re, ood, earthquake or other natural disasters), product

tampering, use of accessories not endorsed by Blendtec, service performed or

attempted by unauthorized service agencies, units that have modiﬁcations, or

have been or used for commercial purposes are not included under this warranty�

The quality of Blendtec blenders is unsurpassed� You will enjoy years of wonderful

and reliable service from your Blendtec Total Blender�

THIS WARRANTY APPLIES ONLY TO PRODUCTS SOLD BY BLENDTEC OR ITS

AUTHORIZED DEALERS

Limited Warranty

Blendtec warrants the blender motor to be free of defect in material and work-

manship for the warranty period� During this period, such defects will be repaired

or the product replaced at Blendtec’s discretion without charge� This warranty

does not cover damage caused by misuse, accident, or negligence� All implied

warranties, including but not limited to implied warranties of ﬁtness and mer-

chantability, are limited in duration to the warranty period on motor and jar� Any

unit submitted for repair must be accompanied by proof of original purchase and

should be shipped prepaid to:

Blendtec

1206 South 1680 West

Orem, UT 84058

(800) 253-6383

(801) 222-0888

UNDER WARRANTY

1� Contact Blendtec immediately to diagnose the difﬁculty� Please have blender

serial number ready as well as a description of the problem� Do not at-

tempt to do your own repairs� Repairs made by persons other than Blendtec

authorized service representatives will void the warranty� Many issues can

be resolved simply and quickly over the phone.

2� If the difﬁculty cannot be resolved over the phone, your unit may require

replacement� If blender is under warranty, Blendtec will repair or replace

the unit at no cost� Cosmetic damage and abuse are not included�

3� Upon receiving instructions from Blendtec, box up your existing unit and

enclose the following:

Your Name: _________________________________________________________

Address: ____________________________________________________________

Phone Number: _______________________________________________________

Motor Serial #(Found on bottom of motor base): ____________________________________

Cycle Count (From the LCD Information Center): ___________________________________

Your Purchase Date: ____________________________________________________

Place of Purchase: ______________________________________________________

An explanation of the problem: ___________________________________________

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blendtec TotalBlender Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blendtec TotalBlender

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info