Bedienungsanleitung Blomberg GSN 9122 (Seite 2 von 2) (Englisch)

581443

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

QUICK REFERENCE GUIDE

On/off button

Push in the on/off button and check that the indicator light comes

on.

Salt level indicator light

When this indicator light comes on, you must

refill special salt (If applicable).

In machines which do not possess an electrical

salt indicator, the salt content can be read on

the container for the salt. When the visual fill

indicator is dark, there is enough salt in the

container.

When the colour is light, open the container and add dishwasher

salt.

Rinse aid level indicator light

If the indicator light comes on, you have to refill

rinse aid (If applicable).

You can also tell whether rinse aid must be

refilled by looking at the rinse aid dispenser.

When the visual fill indicator is dark, there is

enough rinse aid in the dispenser.

When the colour is light, open the dispenser

and refill rinse aid.

Program selection Knob

Use the program selection Knob to choose your washing program.

Half Load (1/2) button

When there are few dishes, you press this button after pressing

the programme selection button. When turning the dishwasher on,

the indicator light on the button lights up. This function helps you to

save water and energy.

Time delay

With the delay function of your machine, you may delay the starting

time of the program up to 3-6-9 hours using the Time delay button.

3-6-9 hour lamps will start flashing respectively, each time you

press the delay button. If you press the Start/Cancel button while

the desired delay lamp is flashing, then the delay lamp comes

on constantly and the function is saved to the memory. As of this

moment, the countdown starts. Upon completion of the delay

period, the delay lamp will go off and the selected washing program

will start.

If you press the Delay Button when the 9 hours delay lamp is

flashing, then the delay lamps goes off. If you press the Start/

Cancel button when the Delay Lamps are not lit, then the selected

program will start without any delay.

You may follow the remaining delay period from the delay lamps.

For example: If you select the 9 hours delay option, then the 6

hours lamp will come on when there is 6 hours remaining to the

start of washing program and 3 hours lamp will come on when there

is 3 hours remaining.

Changing the delay period

Press Start/Cancel button. The Delay period lamp will start flashing.

You may choose the new delay time by pressing the delay button

again.

Press Start/Cancel button again to save the setting.





























Visual Indicator

Start/Cancel button

You use the button to start the selected program; the light on the

button lights up.

Stop the program with the Start / Cancel button if you would like to

open the door once the dishwasher’s washing program is running.

LED progress indicator lights

The program sequence throughout the

washing process can be monitored from the

progress indicator lights on the control panel.

! Warning

Following the washing stage, in order to drain

and remove water from inside the machine completely, the machine

will cancel for approximately 35 minutes. Do not worry this is not a

fault. The End progress indicator light will come on when finished.

! Warning

Do not switch the machine off before End light comes on.

How to cancel the washing program

To cancel a program while the machine is operating:

Press start/stop button for 3 seconds. The machine will drain the

water inside the machine for 45 seconds. The program is cancelled

when washing light goes off. Then, you can choose and start a new

program.

! Important:Depending on the stage of the program you have

cancelled, there may be detergent residue or rinse aid inside the

machine and on the load. Make sure the items in the dishwasher

are not used before washing properly.

How to change the washing program

To change the program selection while the machine is operating:

Press Start/Cancel button. The washing light will go off.

Select the new program. Press Start/Cancel button. The washing

light will be on and new program will start.

! Important:The new program will NOT start from the beginning.

It will start from the stage last carried out by the previous program

selection.

Improper Loading Of Dishware

Cancelling the delay function

Keep the Start/Cancel button pressed for 3 seconds. The selected

delay period will be cancelled.

As soon as the cancelling starts, the water that may be remained in

your machine will be drained for 30 seconds due to safety reasons.

17 7932 01 00_AG

On/Off indicator light

Programme selection Knob

Start/Cancel button

LED progress indicator lights

On/Off button

Rinse aid level indicator light

Salt level indicator light

Time Delay indicator lights

Time Delay button

Half Load (1/2)

On/Off

Wash

Dry

End

Visual Indicator

(If applicable)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg GSN 9122 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Blomberg GSN 9122

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info