Bedienungsanleitung Blomberg TKF 7231 (Seite 48 von 52) (Englisch, Dänisch)

582099

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Auxiliary function

Cancel audio warning

Your dryer will give an audio warning when the

programme comes to an end. If you do not

want to hear the audio warning, press “Cancel

Audio Warning” button. The relevant light

will turn on when this button is pressed and

an audio warning will not be given when the

programme comes to an end.

C You can select this function either before or

after the programme starts.

Warning indicators

C Warning indicators may differ according to

the model of your dryer.

Filter cleaning

A warning light will turn on to remind filter

cleaning after the programme finishes.

C If the filter cleaning warning light lights up

continuously, please refer to, “Suggested

solutions for problems”.

Water tank

Warning light starts flashing when the tank is

filled with water. The dryer stops operating if

the warning light turns on when a programme

is running. Drain the water in the water tank

to restart the dryer. Press “Start/Pause/

Cancel” button to start the programme after

you have emptied the water tank. The warning

light turns off and the programme resumes

operating.

Time delay

If you wish to dry your clothes at a later time,

thanks to the time delay function, you can

delay the program start up to 3 hours, 6 hours

or 9 hours.

1. Open the loading door and put the laundry in.

C Make sure that all air outlets are open, door

filter is cleaned and the water tank is empty.

2. Set the drying program and, if required, the

auxiliary functions.

3. When the time programming button is

pressed once, a 3 hour delay is selected

and the relevant led lights. When the same

button is pressed again, 6 hours; and if

pressed once more, 9 hours delay will be

selected. If the time programming button

is pressed one more time, time delaying

function will be cancelled. Set the time

delay as you require.

4. Delayed operation of the selected program

is started by pressing the “Start/Pause/

Cancel” button after selecting the time

delay.

C Additional laundry may be loaded / taken out

during the time delay period.

C During the time delay period, laundry is

rotated for 4 seconds in every 10 minutes to

prevent creasing.

Canceling the time delay

If you want to cancel the time delay

countdown and start the program:

1. Press “Start/Pause/Cancel” button for

about 3 seconds.

2. Press “Start/Pause/Cancel” button to start

the program right away.

Starting the programme

1. Press “Start/Pause/Cancel” button to start

the programme.

2. Light of the “Start/Pause/Cancel” button

will turn on to indicate that the programme

has started.

Progress of program

Progress of a running program is shown

through the program follow-up indicator.

At the beginning of every program step, the

relevant indicator LED will light up and light of

the completed step will turn off.

“Drying”:

- Drying level will be illuminated during the

whole drying process until the drying degree

reaches “iron dry”.

“Iron Dry”:

- Starts to illuminate when the drying degree

reaches “iron dry” step and remains illuminated

until the next step.

“Ready to wear”:

Starts to illuminate when the drying degree

reaches “Ready to wear” step and remains

illuminated until the next step.

“Final / Anti-creasing”:

- Illuminates when the program comes to an

end and anti-creasing function is activated.

C If more than one LED light up or flash

concurrently, it means there is malfunctioning

or a failure (please see, Solution suggestions

for problems).

Changing the programme after it has

started

You can use this feature to dry your clothes

under higher or lower temperatures after your

dryer has started.

For example;

1. Press and hold the “Start/Pause/Cancel”

button for about 3 seconds to “Cancel”

the programme in order to select “Extra

Dry” programme instead of “Iron Dry”

programme.

2. Select the “Extra Dry” programme by

rotating the programme selection button.

3. Press “Start/Pause/Cancel” button to start

the programme.

C Press “Start/Pause/Cancel” button for 3

seconds to cancel the programme or turn the

programme selection knob in any direction

to end the programme while the machine

is running. Water tank and filter cleaning

warning lights turn on to warn the user when

the programme is cancelled by pressing the

“Start/Pause/Cancel” button for 3 seconds.

However, the warning lights do not turn

on when the programme is cancelled by

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg TKF 7231 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info