Bedienungsanleitung Blomberg TKF 8239 (Seite 30 von 36) (Deutsch, Englisch)

581564

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Auxiliary function

Cancel audio warning

Your dryer will give an audio warning when the

programme comes to an end. If you do not want

to hear the audio warning, press “Cancel Audio

Warning” button. The relevant light will turn on

when this button is pressed and an audio warning

will not be given when the programme comes to

an end.

C You can select this function either before or

after the programme starts.

Warning indicators

C Warning indicators may differ according to the

model of your dryer.

Filter cleaning

A warning light will turn on to remind filter

cleaning after the programme finishes.

C If the filter cleaning warning light lights up

continuously, please refer to, “Suggested

solutions for problems”.

Water tank

Warning light starts flashing when the tank is

filled with water. The dryer stops operating if

the warning light turns on when a programme

is running. Drain the water in the water tank to

restart the dryer. Press “Start/Pause/Cancel”

button to start the programme after you have

emptied the water tank. The warning light turns

off and the programme resumes operating.

Time delay

If you wish to dry your clothes at a later time,

thanks to the time delay function, you can delay the

program start up to 3 hours, 6 hours or 9 hours.

1. Open the loading door and put the laundry in.

C Make sure that all air outlets are open, door

filter is cleaned and the water tank is empty.

2. Set the drying program and, if required, the

auxiliary functions.

3. When the time programming button is

pressed once, a 3 hour delay is selected and

the relevant led lights. When the same button

is pressed again, 6 hours; and if pressed once

more, 9 hours delay will be selected. If the

time programming button is pressed one more

time, time delaying function will be cancelled.

Set the time delay as you require.

4. Delayed operation of the selected program is

started by pressing the “Start/Pause/Cancel”

button after selecting the time delay.

C Additional laundry may be loaded / taken out

during the time delay period.

C During the time delay period, laundry is

rotated for 4 seconds in every 10 minutes to

prevent creasing.

Canceling the time delay

If you want to cancel the time delay countdown

and start the program:

1. Press “Start/Pause/Cancel” button for about 3

seconds.

2. Press “Start/Pause/Cancel” button to start the

program right away.

Starting the programme

1. Press “Start/Pause/Cancel” button to start the

programme.

2. Light of the “Start/Pause/Cancel” button will

turn on to indicate that the programme has

started.

Progress of program

Progress of a running program is shown through

the program follow-up indicator.

At the beginning of every program step, the

relevant indicator LED will light up and light of the

completed step will turn off.

“Drying”:

- Drying level will be illuminated during the whole

drying process until the drying degree reaches “iron

dry”.

“Iron Dry”:

- Starts to illuminate when the drying degree

reaches “iron dry” step and remains illuminated until

the next step.

“Ready to wear”:

Starts to illuminate when the drying degree reaches

“Ready to wear” step and remains illuminated until

the next step.

“Final / Anti-creasing”:

- Illuminates when the program comes to an end

and anti-creasing function is activated.

C If more than one LED light up or flash

concurrently, it means there is malfunctioning

or a failure (please see, Solution suggestions

for problems).

Changing the programme after it has

started

You can use this feature to dry your clothes under

higher or lower temperatures after your dryer has

started.

For example;

1. Press and hold the “Start/Pause/Cancel”

button for about 3 seconds to “Cancel” the

programme in order to select “Extra Dry”

programme instead of “Iron Dry” programme.

2. Select the “Extra Dry” programme by rotating

the programme selection button.

3. Press “Start/Pause/Cancel” button to start the

programme.

C Press “Start/Pause/Cancel” button for 3

seconds to cancel the programme or turn the

programme selection knob in any direction

to end the programme while the machine

is running. Water tank and filter cleaning

warning lights turn on to warn the user when

the programme is cancelled by pressing the

“Start/Pause/Cancel” button for 3 seconds.

However, the warning lights do not turn

on when the programme is cancelled by

turning the programme selection knob. Only

the drying light turns on and the machine

remains in hold until a new programme is

selected and the “Start/Pause/Cancel” button

is pressed. Child-proof lock of the machine

should not be active in order to perform

these two operations. If the child-proof lock is

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Blomberg TKF 8239 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info