42087
13
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
ON A GLANCE
Preparation and start
1. Put laundry into the drum, close the door.
2. Switch on the appliance by using the
On/Off Button.
3. Set the program selector
4. If wanted, use the time delay
5. Press >Start< button.
Changing the program
To change to another program, the running
program has to be stopped. The Start
button has to pressed for 2 seconds to
cancel the program.
Aborting a program
Do not turn off the appliance during the
heating phase (Indicator “Drying”
flashes). Risk of heat accumulation!
1. First stop the running program (press
the > Start< for 2 seconds.)
2. Select the program >Fluff/Refresh<
3. Press the >Start< button.
4. Wait till the end of the program.
Adding more laundry
This is only reasonable at the beginning
of a program; otherwise you will have
a mix of half-dried and too strongly
dried clothes.
1. Press the >Pause< button.
2. Put the laundry into the drum, close the
filling door.
3. Press the >Start< button.
Laundry final drying
1. Adjust the program selector to one of the
timed programs 60 min<, >40 min< or
>10 min<.
2. Press the >Start< button.
Program end
The program has ended when the indicators
>Stop/ < and >Clean fluff filter < flash.
During the anti-crease (at function “Anti-
crease”) the indicator “Stop” will flash.
Now you can end the program at any
time.
1. Open the door, take out the laundry,
check the drum for foreign matters.
2. Adjust program selector to >Stop<.
3. After every drying:
- Clean the fluff filter (see “Fluff filter”).
4. After 20 times drying or once a month:
Clean the air cooler (see “air cooler”)
5. After 50 times drying or 4 times a year:
- Clean the drum rips (see “Drum rips”).
6. According to need:
- Clean the case and display; use a soft
cloth and mild cleaning fluid; dry with
a soft cloth.
Do not use any scrubbing sponge or
scrubbing agent! These will damage
plastic parts and varnish.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Blomberg TKF1230 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Blomberg TKF1230

Blomberg TKF1230 Bedienungsanleitung - Deutsch - 17 seiten

Blomberg TKF1230 Bedienungsanleitung - Holländisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info