Bedienungsanleitung Bomann GS 184 (Seite 10 von 11) (Englisch)

552107

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

04/2013

TIPS FOR ENERGY SAVING

• Disconnect the plug if you do not use the device.

• Do not install the device near stoves, heaters or other heat sources. In case of higher ambient

temperatures, the compressor will run more frequently and longer.

• Ensure sufficient ventilation at the bottom and rear side of the device.

Never block any ventilation openings.

• Allow warm dishes to cool down before putting them in the device.

• Do not open the door longer then necessary.

• Avoid opening all freezer compartments at the same time.

• Make sure that the temperature in the freezer does not rise above -18°C.

• The device should be defrosted regularly.

• Always keep the condenser – metal grid on the rear side (if existing) – clean.

• Make sure the door sealing is in good order for the door to close properly.

MAINTENANCE AND CLEANING

Cleaning and care

For hygienic reasons, clean the interior and accessory parts regularly.

WARNING

• Always disconnect the plug or turn off/ unscrew the fuse before cleaning. Pull the plug and not the

cable.

• Does not use steam cleaners for cleaning the device; moisture could enter electrical components.

Risk of electric shock! Hot steam could damage the plastic parts. The device must be dry before

restarting operation.

• Essential oils and organic solvents, such as the juice of lemon or orange skin, butanoic acid or

cleaning agents containing acetic acid can damage plastic parts. Prevent contact of any part with

such substances. Do not use abrasive cleaning agents.

Pls. do as follows:

• Remove all food and keep covered at a cool location.

• Use warm water and a mild detergent for cleaning the interior (including rear side and bottom).

• After thorough drying, restart operation.

• Clean the condenser - metal grid on the rear side (if existing) once a year, using a soft brush or

vacuum cleaner.

WARNING

Do not bend the cooling coils.

Do not use arenaceous abrasives.

Repairs

WARNING

Servicing of electric devices must be conducted by qualified experts only. Incorrect or improper repairs

constitute a risk for the user and will void the warranty!

What if . . . Troubleshooting

The design of the device ensures a trouble-free operation as well as a long life cycle. Nevertheless, if

any defect occurs during operation, please check if it is caused by improper operation.

The following problems can be solved by you by checking for the possible cause.

PROBLEM

POSSIBLE CAUSE

SOL

TION

The device is

not working

properly or at

all

Is the plug securely connected to the

mains?

Has the safety mechanism of the

wall socket been triggered?

Is the temperature control properly set?

Is the place unqualified?

Connect the plug properly to the sock

et,

turn on the fuse, and contact a techni

cian if

necessary.

Check the settings.

Check the ambient temperature.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann GS 184 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bomann GS 184

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info