552126
27
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
Overflow .
Whe n some malfunctions come on, the appl iance will display error codes to warn you:
Longer inlet time.
F aucets is not opened, or w ate r intake is
restricted,or water pressure is too low.
Some element of dishwasher leaks .
E1
E4
The dishe s were not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
Select a more intensive programme.
See" Wash Cycle Table ."
Use more detergent, or change your detergent.
Rearrange the items so th at the s p ay can rotate freely.r
Clean and/o r fit the filter combination correctly.
Clean the sp ay arm jets. See "Cleaning the Spray
Arms".
r
Use less deter gent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishw asher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door s lightly so that the steam can
escape. Begin unloading the dishwasher only once t
he dishes are barel y warm to the touch. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
In short program the w ashing temperature is lower.
This also lowers cleaning performance. Choose
a program with a long washing time.
Water drainage is more difficu lt with these i tems.
Cutlery or dishes of this type are not suitable for
washing in the dishwash er.
The programme was
not powerful enough.
Not enough d eter gent
was dispensed.
Item s are blocking
the path o f sp ay arms.r
The filter combination
inthebaseofwash
cabinet is not clean or
is not correctly fitted.
This may cause
the sp ay arm jets
to get blocked.
r
Combination of s oft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cups.
Improper loading
Too little rinse -aid
Dishes are removed
too soon
Wrong program
has bee n selected
Use of cutlery with
a low-quality coating
E8
Open circuit or break of distributary valve.
Failure of o rientation of distributary valve.
27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

bomann-gspe-870

Suche zurücksetzen

  • Fehlermeldung E1 und die Anzeige Wasserzufuhr. Was kann ich machen Eingereicht am 27-12-2017 16:45

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bomann GSPE 870 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bomann GSPE 870

Bomann GSPE 870 Bedienungsanleitung - Deutsch - 30 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info