Bedienungsanleitung Bomann MS 479 CB (Seite 32 von 58) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

651960

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

MS479CB_Instruction Manual_new 01.07.16

- in staff kitchens of shops, ofces and other commercial areas.

It is not designed for use

- by visitors in hotels, motels and other residential facilities;

- on agricultural property;

- in bed and breakfast type environments.

Overview of the Components

1 Cover

2 Foam tank

3 Hot plate with safety switch

4 Motor/heating unit

5 Power cord

6 Reheat button with red LED

7 Cold button with blue LED

8 Stirrer for frothing milk

9 Stirrer for hot drinks without foaming

Preparation

• Remove the appliance and all included accessories from

the box.

• In order to remove any production residue, clean all acces-

sories before initial use as described in “Cleaning”.

• Place the device on a stable, at and dry surface.

Electrical Connection

• Check if the mains voltage to be applied matches the

voltage of the appliance. Refer to the rating label for

detailed specications.

• The redundant length of the connecting cable can be

wound up at the bottom of the motor/heating unit. Connect

the power cord into a grounded outlet (If foam tank (2) is

not attached the LEDs in both buttons ash (6 and 7)).

Instructions for Operation

1. Open the lid (1): Pull the cover (1) upwards from the

foam tanks (2).

2. Insertion of a stirrer: At the bottom of the tank (2) you

see the axle of the stirrer (8 or 9). Insert the stirrer (8 or 9)

on the axle and check to make sure it can rotate freely.

3. Filling the foam tank (2): Fill the desired quantity of milk

or a hot drink in the foam tank (2). Note the corresponding

MIN and MAX markers in the foam tank (2) (lower MAX

marking for frothing milk, upper MAX marker for drinks

without foam).

4. Function selection:

Function Button Stirrer

Frothing cold milk

Stirrer (8) for

frothing

Frothing hot milk

Stirrer (8) for

frothing

Warm milk or

cocoa (without

foaming)

Stirrer (9) for hot

drinks without

foaming

5. The selected button is lit continuously while the stirrer

(8 or 9) stirs drinks or foams. After about 2 minutes, the

device switches off automatically and the respective

button ashes about 8 times.

NOTE:

If the foam tank (2) has been lifted from the motor/heating

unit (4), the LEDs in the two buttons (6 and 7) blink.

Finish the operation and empty the foam tank (2)

• Turn off the illuminated button and unplug the power cord

(6).

• Wait until the stirrer (8 or 9) has come to a standstill.

• Remove the foam tank (2) from the motor/heating unit (4)

and pour the contents into a cup or into coffee.

• Clean all used components as described in Chapter

“Cleaning”.

Recipes

Hot drinks:

Cappuccino

• Use the stirrer to foam (8) the milk for a cappuccino and

prepare hot frothed milk as described in the Chapter

"Instructions for Operation".

• Fill your cappuccino cup rst with espresso and then add

milk foam and cold milk. We recommend a proportion of

1/3 espresso to 2/3 milk froth.

Latte Macchiato

• Use the stirrer to foam (8) the milk for a latte macchiato

and prepare hot frothed milk as described in the Chapter

"Instructions for Operation".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bomann MS 479 CB Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info