552033
14
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
14
01/2012
Cold conditions
- Close the tap.
- If the water inlet hose is frozen, wrap the hose connection with a hot-towel.
- Remove the inlet hose and soak it in warm water.
- Full fill the drum with 2-3 l of warm water.
- Wait a few minutes, until the water has melted, then plug the cord in and select the program 'spin'
and restart the machine.
- Make sure in future that the room temperature is above 0°C.
Repairs
CAUTION
Servicing of electric devices must be conducted by qualified experts only. Incorrect or improper repairs
constitute a risk for the user and will void the warranty!
What if . . . Troubleshooting
Certain problems are due to lack of simple maintenance or oversights. Before contacting your local
Service-Centre, please carry out the checks listed below.
Problem
Possible Cause
Solutions
No water inlet
(Error code E1)
- Is the water tap open or not enough
water pressure?
- Is the drain hose plugged in?
- Is the sensor defective or is a hose
leaking?
- The drain valve is defective.
- The circuit board is defective.
- Check the tap and the water pres-
sure.
- Install the drain hose.
- Check the water sensor and the
hose, change if necessary.
- Contact a specialist.
- Contact a specialist.
Door lock alarm
(Error code E2)
- Is the door properly closed?
- Is the laundry caught between door
and seal?
- The door lock is damaged.
- The circuit board is defective.
- Close the door well.
- Pull the laundry into the drum.
- Contact a specialist.
- Contact a specialist.
No water outlet
(Error code E3)
- Is the filter clogged?
- Is the drain hose clogged or kinked.
- The valve is defective.
- Is the plug connected correctly or is
it a line fault?
- The water sensor is defective.
- The circuit board is defective.
- Clean the filter.
- Clean and check the hose.
- Contact a specialist.
- Check the plug or contact a spe-
cialist.
- Contact a specialist.
- Contact a specialist.
Water overflow /
water sensor
(Error code E4)
- The inlet valve is defective.
- Are the hoses connected correctly?
- The water sensor is defective.
- The circuit board is defective.
- Contact a specialist.
- Check the hose connections.
- Contact a specialist.
- Contact a specialist.
The motor does not
work
(Error code E5)
- The connection between the motor
and wire is not secure.
- The motor is over-heated.
- The motor is defective.
- The circuit board is defective.
- Contact a specialist.
Problem with
heating element
(Error code E6)
- The connection of the heating is
wrong or defective.
- The heating element is defective.
- The circuit board is defective.
- Contact a specialist.
Temperature sen-
sor fault
(Error Code E7)
- The connection of the temperature
sensor is wrong or defective.
- The sensor is defective.
- The circuit board is defective.
- Contact a specialist.
Are you interested in other Bomann products? Please visit our website:
www.bomann.de
Distribution: C. Bomann GmbH • Heinrich-Horten-Str. 17 • D-47906 Kempen
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bomann WA 5610 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bomann WA 5610

Bomann WA 5610 Bedienungsanleitung - Deutsch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info