Bedienungsanleitung Bort BCT-170-M (Seite 6 von 40) (Alle Sprachen)

555176

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Die grinder

INTENDED USE

This tool is intended for high-precision grinding, sanding, cut-

ting, engraving, polishing and drilling in different materials

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1. On/off switch

2. Spindle-lock button

3. Collet

4. Collet nut

5. Speed selection wheel

SAFETY

WARNING! Read all instructions. Failure to follow all instruc-

tions listed below may result in electric shock, ﬁ re and/or

serious injury.

 This tool should not be used by people under the age of 16

years

 Only use this tool for applications without the use of water

 Always disconnect plug from power source before making

any adjustment or changing any accessory

ACCESSORIES

 SBM Group can assure ﬂ awless functioning of the tool only

when original accessories are used

 Use only accessories recommended by SBM Group

 For mounting/using non-SBM Group accessories observe

the instructions of the manufacturer concerned

 Use only accessories with an allowable speed matching at

least the highest no-load speed of the tool

 Do not use damaged, deformed or vibrating accessories

 Handle and store grinding/cutting discs carefully to avoid

chipping and cracking

 Protect accessories from impact, shock and grease

 Never use grinding discs over 32 mm (1 1/4”) Ø

 Never use drill bits over 3.2 mm (1/8”) Ø

 Never use a cutting disc for side grinding

 Never use reducors or adaptors to ﬁ t large-hole grinding/ cut-

ting discs

BEFORE USE

 Always check that the supply voltage is the same as the volt-

age indicated on the nameplate of the tool (tools with a rating

of 230V or 240V can also be connected to a 220V supply)

 Do not work with materials containing asbestos

 Clamp the workpiece in case it does not remain stationary

from its own weight

 Use completely unrolled and safe extension cords with a ca-

pacity of 16 Amps (UK 13 Amps)

 Wear protective glasses and gloves, hearing protection, a

dust mask, and sturdy shoes; when necessary, also wear an

apron

 Wear a dust protection mask when working with materials

which produce dust that is detrimental to health; inform your-

self beforehand about the materials to be worked on

 Ensure that the collet size corresponds with the shaft size of

the accessory

 Be sure tool is switched off when plugging in

English

DURING USE

 Always keep the cord away from moving parts of the tool;

direct the cord to the rear, away from the tool

 Never use tool when cord is damaged; have it replaced by a

qualiﬁ ed person

 Never use spindle lock while tool is running (damage due to

improper handling will be excluded from the guarantee)

 Keep hands away from rotating accessories

 When grinding metal, sparks are generated; keep other per-

sons and combustible material from work area

 Keep ventilation slots uncovered

 In case of electrical or mechanical malfunction, immediately

switch off the tool and disconnect the plug

AFTER USE

 The accessory continues to rotate for a short time after the

tool has been switched off

 Before you put down the tool, switch off the motor and ensure

that all moving parts have come to a complete standstill

 After switching off the tool, never stop the rotation of the ac-

cessory by a force applied against it

 Store tool in locations where temperature will not exceed

50°C

WHEN CONNECTING NEW 3-PIN PLUG (U.K.

ONLY):

 Do not connect the blue (= neutral) or brown (= live) wire in

the cord of this tool to the earth terminal of the plug

 If for any reason the old plug is cut off the cord of this tool, it

must be disposed of safely and not left unattended

Your machine is double insulated in accordance with

EN 50144; therefore no earthwire is required.

MAINTENANCE

Make sure that the machine is not live when carrying

out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth, prefer-

ably after each use. Keep the ventilation slots free from dust and

dirt.If the dirt does not come off use a soft cloth moistened with

soapy water. Never use solvents such as petrol, alcohol, ammo-

nia water, etc. These solvents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please contact

your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during transport,

it is delivered in a sturdy packaging. Most of the packaging ma-

terials can be recycled. Take these materials to the appropriate

recycling locations. Take your unwanted machines to your local

SBM Group dealer. Here they will be disposed of in an environ-

mentally safe way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bort BCT-170-M Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info