Bedienungsanleitung Bort BOF-1080N (Seite 7 von 42) (Alle Sprachen)

555171

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Router

INTENDED USE

The tool is intended to route grooves, edges, proﬁ les and elon-

gated holes in wood, plastic and light building materials as well

as to copy-route

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1 On/off switch

2 Handle

3 Router base

4 Locking bolt for parallel guide

5 Opening for parallel guide

6 Collet nut

7 Spindle lock

8 Revolver-depth stop

9 Locking bolt depth stop

10 Depth stop

11 Clamping lever

12 Scale cutting depth

13 Adjusting wheel electronic speed control

14 Height adjusting button

SAFETY

WARNING! Read all instructions. Failure to follow all instructions

listed below may result in electric shock, ﬁ re and/or serious in-

jury.

GENERAL

• This tool should not be used by people under the age of 16

years

• Always disconnect plug from power source before making any

adjustment or changing any accessory

ACCESSORIES

• SBM Group can assure ﬂ awless functioning of the tool only

when original accessories are used

• Use only accessories with an allowable speed matching at

least the highest no-load speed of the tool

• Do not use damaged or deformed router bits

• Only use sharp router bits

• Protect accessories from impact, shock and grease

• Only use high speed steel (HSS) or carbide-tipped (CT) router

bits with this tool

BEFORE USE

• Avoid damage that can be caused by screws, nails and other

elements in your workpiece; remove them before you start

working

• Always check that the supply voltage is the same as the volt-

age indicated on the nameplate of the tool (tools with a rating

of 230V or 240V can also be connected to a 220V supply)

• Do not work with materials containing asbestos

• Clamp the workpiece in case it does not remain stationary

from its own weight

• Do not clamp the tool in a vice

• Use completely unrolled and safe extension cords with a ca-

pacity of 16 Amps (UK 13 Amps)

• The noise level when working can exceed 85 dB(A); wear ear

protection

• Wear a dust protection mask when working with materials

which produce dust that is detrimental to health; inform your-

self beforehand about the materials to be worked on

• Be sure tool is switched off when plugging in

DURING USE

• Always keep the cord away from moving parts of the tool; di-

rect the cord to the rear, away from the tool

• Never use tool when cord or base-plate (=protective guard) is

damaged; have it replaced by a qualiﬁ ed person

• Keep hands and ﬁ ngers away from router bit when tool is

switched on

• Never exceed maximum cutting depth of router bit while cut-

ting

• In case of electrical or mechanical malfunction, immediately

switch off the tool and disconnect the plug

• In case the router bit is blocked, resulting in jerking forces on

the tool, immediately switch off the tool

• In case of current interruption or when the plug is accidentally

pulled out, immediately switch off the tool in order to prevent

uncontrolled restarting

• Do not apply so much pressure on the tool that it comes to a

standstill

AFTER USE

• After ﬁ nishing the work, lift lever, guide the tool back into the

upper starting position, and switch off the tool

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire in the

cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut off the cord of this tool, it

must be disposed of safely and not left unattended

3 Mounting adapter plate (for copying with a template)

4 Mounting rip fence

5 Circular guide

6 Mounting/removing router bits

7 Speed control

8 Changing collet

9 Mounting/removing of vacuum cleaner adapter

10 Operating the tool

Your machine is double insulated in accordance with

EN 50144; therefore no earthwire is required.

MAINTENANCE

Make sure that the machine is not live when carrying

out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth, prefer-

ably after each use. Keep the ventilation slots free from dust and

dirt.If the dirt does not come off use a soft cloth moistened with

soapy water. Never use solvents such as petrol, alcohol, ammo-

nia water, etc. These solvents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please contact

your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during transport,

it is delivered in a sturdy packaging. Most of the packaging ma-

terials can be recycled. Take these materials to the appropriate

recycling locations. Take your unwanted machines to your local

SBM Group dealer. Here they will be disposed of in an environ-

mentally safe way.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bort BOF-1080N Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info