Bedienungsanleitung Bosch Active Line Drive Unit 25 km-h (Seite 7 von 50) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

657515

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

English–1

Bosch eBike Systems 0 275 007 ADC | (1.4.16)

Safety Notes

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

Save all safety warnings and instructions for future refer-

ence.

The term “battery pack” used in these operating instructions, ir-

respective of model, refers both to standard battery packs (bat-

tery packs with holder on the bike frame) and to rack-type bat-

tery packs (battery packs with holder in the rear rack/carrier).

 Do not open the drive unit yourself. The drive unit must

be repaired only by qualified experts and only with

original spare parts. This will ensure that the safety of the

drive unit is maintained. Unauthorised opening of the drive

unit will void warranty claims.

 All components mounted to the drive unit and all other

components of the eBike drive (e.g., the chainwheel,

chainwheel seat, pedals) may be replaced only with

identical components or components specifically ap-

proved for your eBike by the bicycle manufacturer. This

protects the drive unit against overload and damage.

 Remove the battery pack from the eBike before begin-

ning work (e.g. inspection, repair, assembly, mainte-

nance, work on the chain, etc.) on the eBike, transport-

ing it by car or plane, or storing it. Unintentional

activation of the eBike system poses a risk of injury.

 The eBike system can switch itself on when the eBike is

pushed backwards.

 The push-assistance function may only be used when

pushing the eBike. Danger of injury when the wheels of

the eBike do not have ground contact while using the push-

assistance function.

 If the push assistance is switched on, the pedals will

also rotate on bikes with back-pedalling function. When

the push assistance is activated, make sure that your legs

are a sufficient distance away from the rotating pedals.

There is a risk of injury.

 Use only original Bosch battery packs approved for your

eBike by the manufacturer. Using other battery packs can

lead to injuries and pose a fire hazard. When using other bat-

tery packs, Bosch shall not assume any liability and warranty.

 Do not make any modifications to your eBike system or

fit any other products which would be suitable for in-

creasing the performance of your eBike system. This

normally reduces the lifetime of the system and risks dam-

age to the drive unit and the bike. There is also a risk of los-

ing the guarantee and warranty claims on the bike you have

purchased. By handling the system improperly you are al-

so endangering your safety and that of other road users,

thus running the risk of high personal liability costs and

possibly even criminal prosecution in the event of acci-

dents attributable to manipulation.

 Please observe all national regulations on registering

and using eBikes.

 Read and observe the safety warnings and instructions

in all operating instructions of the eBike system and in

the operating instructions of your eBike.

Product Description and

Specifications

Intended Use

The drive unit is intended only for driving your eBike and must

not be used for other purposes.

Product Features

The numbering of the components shown refers to the illus-

trations on the graphic pages at the beginning of the manual.

Individual illustrations in these operating instructions may dif-

fer slightly from the actual circumstances depending on the

equipment of your eBike.

1 Drive unit

2 Speed sensor

3 Spoke magnet of the speed sensor

Technical Data

Drive Unit Drive Unit

Article number

0 275 007 040

0 275 007 042

Rated continuous output W250

Torque at drive, max.

Nm 50

Rated voltage

V36

Operating temperature

°C –5...+40

Storage temperature

°C –10...+50

Degree of protection

IP 54 (dust and splash

water protected)

Weight, approx. kg 4

Bike lights

Voltage, approx.

2)3)

V6/12

Maximum output

–Front light

–Taillight

8.4/17.4

0.6/0.6

1) Not possible via the eBike battery pack in all country-specific ver-

sions, depending on the statutory regulations

2) The voltage level is preset and can be changed only by the bicycle

dealer.

3) When changing the bulbs, ensure that the bulbs are compatible with

the Bosch eBike system (ask your bicycle dealer) and that the specified

voltage matches. Bulbs must be replaced only with bulbs of the same

voltage.

 Incorrectly inserted bulbs can be destroyed!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Active Line Drive Unit 25 km-h Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info