Bedienungsanleitung Bosch CR 50 (Seite 9 von 12) (Englisch)

697152

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

6720856748 (2016/03)CR50

Faults | 9

5.3 Info menu

The current system values and the active operating status can

be displayed via the Info menu. Changes are not possible.

Info > Heating menu

Table 6

Info > DHW menu

Table 7

5.4 Settings menu

Settings > “Language” menu

Table 8

Settings > Time/Date menu

Table 9

Settings > Format menu

Table 10

6 Faults

If a fault persists:

▶ Confirm the fault.

▶ Faults that are still active are displayed by pressing the Back

key.

▶ Call an authorised contractor or customer service and give

them the fault code and sub-code, as well as the ID no. of

the user interface.

Table 11 Your contractor must enter the ID no. here.

Menu item Description (possible displays)

Operat. stats The current active status is displayed here:

• If OFF is displayed, the heating is off, but

frost protection remains active.

• If Heating or Setback is displayed, the

heating system is operating in automatic

mode. Based on the time program, the

system heats to the temperature set for

the particular operating mode.

• If Manual is displayed, the heating system

operates in the manual operation.

Room temp. The currently measured room temperature.

Menu item Description (possible displays)

Operat. stats Display of the current operating status of

water heating: ON or OFF

Set temp Desired DHW temperature.

Actual temp Current measured DHW temperature.

Menu item Function description

“Language”

1) The display shows the set language.

The language used for menus and menu items

can be changed.

Menu item Function description

Time of day Set the current time.

Date Set the current date.

DLS Activate or deactivate automatic changeover

between summer and winter time.

If ON is set, the time of day is automatically

changed from 02:00 to 03:00 (on the last

Sunday in March and from 03:00 to 02:00 on

the last Sunday in October).

Time correct. Time correction of the internal clock of the

user interface in seconds per week ( – 20 s/

week ... 20 s/week). Only the unit "s"

(seconds) appears on the display instead of

s/week (seconds per week).

Menu item Function description

Date format Display of the date in all menus

(DD.MM.YYYY or MM/DD/JJJJ), where:

D = day, M = month, Y = year. If the year is

not needed, only DD.MM. or MM/DD/

appears.

Time format A 24-hour format (24h) and a 12-hour

format (12h, am and pm) are available for

displaying the time.

Temp. Format The units °C and °F are available for

displaying the temperatures.

Sensor calib. If the room temperature displayed by the

user interface is not accurate, correct the

deviation by up to 3 °C.

Contrast If what appears on the display is hard to see

because of the lighting conditions, adjust the

contrast of the display (36 % ... 64 %).

__ _

Menu item Function description

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch CR 50 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch CR 50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info