555443
55
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
Heatronic 40007738003455 (2014/04) 55 of 60
E r ror Messages (2 of 3)
Error Message Description Troubleshooting Tips
BOILER (#) OUTLET SENSOR MAXIMUM EXCEEDED
The boiler outlet (#) temperature exceeded the Maximum Outlet
temperature. As a result, the control stops operation for the
associated boiler. The error message self clears once the error
condition is cleared.
BOILER (#) OUTLET TEMP
EXCEEDS MAX OUT SETTING
BOILER INLET SENSOR ERROR
OPEN or SHRT displays on the screen.
Due to an open or short circuit, the control failed to read the
boiler inlet sensor. The control operates normally while the error
message is present. The error message self clears once the
error condition is corrected.
CHECK BOILER INLET SENSOR,
CHECK BOILER INLET SENSOR
WIRING
PRIMARY PUMP P1 FLOW PROOF FAILURE
The primary pump P1 has failed. Once the primary pump 1 relay
closed, a primary pump flow proof was call not detected before
the flow proof delay time elapsed.
CHECK FLOW PROVING DEVICE,
CHECK FLOW PROVING DEVICE
WIRING
PRIMARY PUMP P2 FLOW PROOF FAILURE
The primary pump P2 has failed. Once the primary pump 2 relay
closed, a primary pump flow proof was call not detected before
the flow proof delay time elapsed.
CHECK FLOW PROVING DEVICE,
CHECK FLOW PROVING DEVICE
WIRING
PRIMARY PUMP P1 & P2 FLOW PROOF FAILURE
Both the primary pump P1 & P2 have failed.
CHECK FLOW PROVING DEVICE,
CHECK FLOW PROVING DEVICE
WIRING
PRIMARY PUMP FLOW PROOF ERROR
The primary pump has been turned off but the primary pump
flow proof remains detected after 4 minutes.
CHECK FLOW PROVING DEVICE,
CHECK FLOW PROVING DEVICE
WIRING
COMBUSTION AIR PROOF FAILURE
The combustion air damper has failed. The Comb Air (Aux) relay
closed, but the control did not detect a Comb Air Proof before
the C.A. proof delay time elapsed.
CHECK CA PROVING DEVICE,
CHECK CA PROVING DEVICE
WIRING
COMBUSTION AIR PROOF CALL ERROR
The combustion air damper has been turned off but the Comb
Air Proof remains detected after 4 minutes.
CHECK CA PROVING DEVICE,
CHECK CA PROVING DEVICE
WIRING
COMMON FLUE MAXIMUM EXCEEDED
The Common Flue Sensor temperature has exceeding the
FLUE MAX setting. As a result, the control stops operation for
the entire plant.
COMMON FLUE TEMP EXCEEDS
MAX SETTING
NO HEAT ALERT
The boiler supply temperature did not increase within the boiler
alert time. The control operates normally while this Alert is
present. To reset the Alert, press the ‘CLEAR’ button while
viewing this warning message.
NO CHANGE IN SUPPLY TEMP
WITHIN SPECIFIED PERIOD OF
TIME
55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch Heatronic 4000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch Heatronic 4000

Bosch Heatronic 4000 Bedienungsanleitung - Französisch - 60 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info