Bedienungsanleitung Bosch tda 1503 sensixx motorsteam (Seite 4 von 32) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

321995

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Ironing with steam Fig. 4

The motor conveys a uniform volume of steam.

lf the set temperature is too low, the steam is

automatically switched off to prevent dripping.

Steam volume control Fig. 5

(for some models)

Your ¡ron is equipped with steam volume control.

Use the control dial to set the steam volume;

Dial to the left = minimum steam volume

Dial to the right = maximum steam volume

The steam volume control is lighted.

Spray Fig.6

Vertical steam feature Fig.7

Te mperature: max

Hang a item of clothing on a hanger and move

the ¡ron vertically at a distance of 10-20 cm from the

clothing, holding down the motor steam

button.

Do NOT iron clothing which is being worn!

After ironing

Empty the tank: hold the ¡ron with the point down

and shake gently.

Store the ¡ron upright and not on the soleplate.

Risk of corrosion (Fig. 8)!

Cleaning

Pull out the mains plug and allow the soleplate to

cool down.

Wipe the housing and soleplate with a damp

cloth only. lf the soleplate is very dirty, iron a linen

cloth soaked in white vinegar or place the

soleplate in a receptacle containing vinegar (max.

1 mm deep). Then rinse with water and dry

thoroughly. Or:

At max setting rub off residue immediately with

a thickly folded, dry cotton cloth.

Caution! Risk of burns!

Never descale the tank or treat with

detergents or solvents, as this would cause

water to drip from the iron when generating

or spraying steam!

Instead: approx. every 4 weeks heat up the ¡ron

with a full tank for 3 minutes at max. setting, then

switch to min. setting and hold the ¡ron over

a bowl and press the motor steam button (Fig. 4)

until the motor automatically switches off

(recognisable by noise and vibration). Set to max.

again and press the motor steam button for

2-3 minutes to flush out the steam chamber.

When the soleplate has cooled down, clean

thoroughly with a damp cloth.

Do not clean the appliance with a professional

steam cleaner

Disposal

Please ask your dealer or inquire at your local

authority about current means of disposal.

This appliance is intended for domestic and not

industrial use.

Keep the operating instructions in a safe place!

Safety information

Electric shock and fire risk

Connect and operate the appliance only in accordance

with the specifications on the rating plate.

lf the cable or appliance is damaged, do NOT use the

appliance.

Keep children away from the appliance.

After using the appliance and if a fault occurs,

pull out the plug.

Before filling the tank, pull out the plug. For safety rea-

sons, repairs e.g. replacing a damaged cable, should

only be carried out by our Customer service division.

NEVER leave a switched-on iron unattended!

Before using your appliance for the

first time

Take the protector off the sole plate

Allow tap water to evaporate for 10 to

20 seconds (press the motor steam button, Fig. 4).

Using the appliance

The pilot light switches ON while the appliance is hea-

ting up and switches OFF as soon as the set tempera-

ture is reached. lf the temperature of the hot iron

drops, you can continue ironing while the iron heats up

again to the set temperature.

Sort laundry according to the fabric care labels and

start at the lowest temperature :

Ironing without steam Fig.1

Do NOT press the motor steam button.

Filling the tank Fig.2/3

First remove the plug!

Use only clean water from the tap without mixing

anything with it. The addition of other liquids will

damage the appliance.

Mix tap water with distilled water according to the

following table in order to prolong the optimum

stream function.

Water Ratio of distilled water

hardness To tap water

Very soft/soft 0

Medium 0

Hard approx. 1

Very hard approx. 2

You can inquire about the water hardness with

your local waterworks.

Do not fill beyond the "Max." level mark!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch tda 1503 sensixx motorsteam Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info