Bedienungsanleitung Bosch Uni Condens 8000 F (Seite 4 von 12) (Englisch)

697430

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Product Information

Uni Condens 8000 F – 6720867069 (2016/10)

H Combustion/room air

▶ Keep the combustion/ambient air free of corrosive

substances (e.g. halogenated hydrocarbons that

contain chlorine or fluorine compounds). This will

help to prevent corrosion.

▶ Keep the combustion air supply free of dust.

H Danger posed by explosive and easily

flammable materials

▶ Never use or store easily flammable materials (e.g.

paper, thinners, paints, etc.) near the appliance.

H Heating system damage due to frost

When the heating system is not in operation (e.g.

controller switched off, fault shutdown), there is a risk

of it freezing when there is frost.

▶ When shutting down or switching off for extended

periods, drain the heating and drinking water pipes

to the lowest point in order to protect the heating

system from freezing.

H Inspection and servicing

▶ Recommendation for customers: Arrange a

maintenance and inspection contract with an

approved contractor, covering an annual inspection

and responsive maintenance.

▶ The user is responsible for ensuring the heating

system is safe and environmentally compatible.

▶ Immediately correct all faults to prevent system

damage!

▶ Use only genuine spare parts from the

manufacturer. Losses caused by the use of spare

parts and accessories not supplied by the

manufacturer are excluded from the manufacturer's

warranty.

H Handover to the user

When handing over, instruct the user how to operate

the heating system and inform the user about its

operating conditions.

▶ Explain how to operate the heating system and draw

the user's attention to any safety relevant action

▶ Explain that conversions and repairs must only be

carried out by a competent person.

▶ Point out the need for inspections and maintenance

for safe and environmentally-compatible operation.

▶ Leave the installation instructions and the

operating instructions with the user for

safekeeping.

2 Product Information

2.1 Declaration of Conformity

The design and operation of this product comply with European

Directives and the supplementary national requirements. Conformity

has been demonstrated by the CE marking.

You can ask for a copy of the declaration of conformity for this product.

For this see the contact address on the back cover of these instructions.

2.2 Determined use

The Uni Condens 8000 F 800...1200 floor standing condensing boiler

has been designed for wet heating systems in (e.g. apartment buildings

or industrial applications).

The boiler is only approved for open-flue mode.

When installing and operating the heating system:

• Comply with standards, regulations and guidelines of the relevant

country.

• Observe the information on the data plate of the boiler.

2.3 Symbol at the boiler

2.4 Data plate

If you contact the manufacturer with any questions about this product,

always provide the details on the data plate. If we have these details, we

can quickly answer your specific query.

The details on the data plate are binding and must be observed!

You will find information such as the serial number, output and approval

details on the data plate.

2.5 Product Description

The Uni Condens 8000 F 800...1200 is a floor standing condensing

boiler with a slim, compact design and a small footprint, comprising a

combustion chamber located at the top and a condensation heating

surface located at the bottom.

With the Uni Condens 8000 F 800...1200 floor standing condensing

boilers, all parts that come into contact with products of combustion or

condensate are made from high grade stainless steel. This makes

operation possible without limitations on the flow and return

temperature, the flow rate or the burner low load.

The Uni Condens 8000 F 800...1200 is also referred to in this manual as

UC8000F 800...1200, boiler or heat source.

The boiler has two separate thermohydraulic return connections for the

high and low temperature heating circuits ( fig. 1, page 5).

The Uni Condens 8000 F 800...1200 must be equipped with a burner

that is suitable for the boiler.

The main components of the boiler are ( fig. 1, page 5):

• Boiler shell [1] in conjunction with a burner

The boiler block transfers the heat produced by the burner to the

heating water.

• Thermally insulating casing

The boiler shell and thermal insulation reduce energy losses.

• Control unit (accessory) [8]

The control unit monitors and controls all electrical boiler

components.

This symbol is used to point out that the installation and

operating instructions must be read prior to installation

operation or maintenance in order to prevent damage to the

system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch Uni Condens 8000 F Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch Uni Condens 8000 F

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info