737211
8
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
Equipmentmustberegularlyexaminedfordamageandrepairs.Theownerisresponsibletomakesurethatregularmaintenance
isdone.Wornordamagedcomponentsmustbereplacedimmediatelyortheequipmentremovedfromserviceuntiltherepairis
made. Only manufacturer supplied components can be used to maintain and repair the equipment.
Adjustable Dumbbell Maintenance:
1. If your dumbbell handle assembly, plates or base become dirty, you can clean them with a cloth lightly dampened with warm water
andasmallamountofmildsoap.Wipedrywithaseparatecloth.
2. The adjustable dumbbell is internally lubricated and will not require more internal lubrication. The contact between weight plates
and selection discs is not lubricated but has naturally low friction. Lubrication is usually not necessary. If you feel it is necessary to
lubricatetheweightplatesand/orselectiondiscs,useonlya“foodgrade”siliconlubricant.
Donotuseanysolvents,harshdetergents,chemicalsorbleachonthisproduct-thiscandamagethematerials,resultingin
degradation of the product’s performance or strength.
Neverattempttodisassemblethedumbbellhandleorbaseassembly–theproductisnotdesignedtobeuserserviced.Doingso
will void the manufacturers warranty. Contact your local Bowflex
®
distributor or vendor for service.
Daily / Before Each Use:
Examine equipment. Make sure it looks in good condition and operates smoothly. If you find damage, DO NOT
USE.
Daily / After Each Use:
Clean equipment with a clean, dry cloth. Do not use cleansers containing enzymes.
Weekly:
Clean equipment fully with a clean cloth lightly dampened with warm water and a small amount of mild soap.
Wipe dry with a separate cloth.
Touch up any scratches with touch-up paint to prevent rust, if necessary.
Monthly:
Examine the frame for signs of cracking or permanent bending. Do not use the equipment if you see this.
Contact your local Bowflex
®
distributor or vendor for service.
Troubleshooting
Problem Solution
Dumbbell handle does not fully go into base
when no plates are attached.
1. Make sure that the adjustment knobs are set directly to the number 4.
2. Make sure that the weight plates are seated correctly in the base assembly.
Dumbbell handle does not fully go into base
when plates are attached.
Make sure that the plates that are still in the dumbbell base are in their correct spots and not
moved to different support slots. This may be blocking the dumbbell from fitting back into the
base.
Adjustment knob will not turn while handle is
in base.
1. Make sure that the dumbbell handle is fully pushed into the dumbbell base. If not fully set into
the base, the locking mechanism will not be released and will prevent the adjustment knobs from
turning.
2. Make sure that the weight plates are seated correctly in the base assembly.
3. Inspect the dumbbell base for dirt, debris or other unwanted material. If necessary, remove
the weight plates from the base to do this check. Remember to put each weight plate back in its
correct location.
Plates are not attached safely to the handle
and drop out.
Make sure that the plates that are still in the dumbbell base are in their correct spots and not
moved to different support slots.
Maintenance / Troubleshooting
EN
8000773.100112.A
8
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bowflex Power-Pak 445 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bowflex Power-Pak 445

Bowflex Power-Pak 445 Bedienungsanleitung - Deutsch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info