ventilation must be as shown in the relevant
paragraph.
Attention: keep ventilation openings clear
of obstruction.
■
If the appliance is transported horizontally, it is
possible that the oil contained in the
compressor flows in the refrigerant circuit. It is
advisable to wait at least two hours before
connecting the appliance to allow the oil to
flow back in the compressor.
■
There are working parts in this product which heat
up. Always ensure that there is adequate
ventilation as a failure to do this will result in
component failure and possible food loss. See
installation instructions.
■
Parts which heat up should not be exposed.
Wherever possible the back of the product should
be against a wall.
■
If the appliance has been transported horizontally,
it is possible that the oil contained in the
compressor flows in the refrigerant circuit. It is
advisable to wait at least two hours before
connecting the appliance to allow the oil to flow
back in the compressor.
Environment Protection
■
This appliance does not contain
gasses which could damage the ozone layer, in
either its refrigerant circuit or insulation
materials. The appliance shall not be discarded
together with the urban refuse and rubbish.
Avoid damaging the cooling unit, especially at
the rear near the heat exchanger. Information
on your local disposal sites may be obtained
from your municipal authorities.
■
The materials used on this appliance marked
with the symbol are recyclable.
19
t
DESCRIPTION OF THE APPLIANCE
➀
➂
➁
➃➄
➅
➆
➇
➈
➀
Butter shelf
➁
Sliding shelf
➂
Bottle shelf
➃
Air outlet duct
➄
Air inlet filter
➅
Salad drawer
➆
Storage shelves
➇
Thermostat
➈
Freeezer compartment
➉
Temperature indicator
➉
