Bedienungsanleitung Braun bp 4900 (Seite 4 von 61) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

403405

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

Display BP4900/BP5900

* For BP5900 only

Note: On BP5900, the Backlight goes on when the unit is turned on, buttons are pressed, or

when results are being displayed. It turns itself o after 10 seconds if no buttons are pressed.

HEART RATE SYMBOL

MEMORY RECORD

MEASURING ERROR

DISPLAY

LOW BATTERY INDICATOR

MONTH

MINUTE

DATE

HOUR

AVERAGE SYMBOL

MORNING AVERAGE RECORD*

EVENING AVERAGE RECORD*

IRREGULAR HEART

BEAT SYMBOL*

MORNING

HYPERTENSION

SYMBOL*

Fig. 9

Setting Month, Date and Time

a. Press Mode (5) button (“month” starts ashing)

Press Set (4) button to set the correct month (1,2,3,…12)

b. Press Mode

(5) button (“date” start ashing)

Press Set (4) button to set the correct date (1,2,3,…31)

c. Press Mode

(5) button (“hour” starts ashing)

Press Set (4) button to set the correct hour (1,2,3,…12)

d. Press Mode

(5) button (“minute” starts ashing)

Press Set (4) button to set the correct minute (0,1,2,3,…59)

e. Press Mode

(5) button again to lock in time settings. Digits will stop ashing.

Taking a Measurement

Wrap the cu around the arm (see “Applying the Arm Cu” section above).

1. Sit upright on the chair to have a correct posture.

2. Press the “START/STOP

” (1) button, all elements of the display indicate

“888” during the rst 3 seconds. The measuring blood pressure symbol will

then ash on the display and the air pressure will automatically pump up

to certain pressure level and start measurement. (Fig.9 BP4900/BP5900)

Do not move or talk in the midst of taking blood pressure measurement.

3. After the air pressure has increased, it will slowly decrease. When the pulse

is detected, the HEART RATE symbol will start ashing.

After taking blood pressure measurement, the product will turn o

automatically after 1 minute.

Memory Function

Your blood pressure monitor can store the latest readings of 48 measurements

for BP4900, or 99 measurements for BP5900.

Storing Measurement Data

After each blood pressure measurement, the Systolic pressure, Diastolic pressure, Pulse rate

and the time & date of specic day will be automatically stored. Memory #01 is always the most

recent one. Once the memory is full, the oldest values will be overwritten.

Recalling Stored Readings

• Press “Memory

” (2) button, M:00 will appear on the display if there is no

data stored in the memory. If there is data stored in the memory, the latest

recorded set of measurement which is the Systolic pressure, Diastolic

pressure, Pulse rate, and the recording time and date and M:01 will appear

on the display for 1 minute.

• Press the “Memory

” (2) button again to read the next line of stored data.

The data called up on the display with 2-digit Memory number (ex. M:02).

7-Day Average Function

Full day Average

• Press the “Average ” (3) button once, “Full Day Average” result will show

on LCD.

• Make sure the DATE / TIME is correct when taking measurement, so you

may get the correct 7-Day Average result.

• If there is no data in memory within past 7 days, “

” will show on LCD.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun bp 4900 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info