Bedienungsanleitung Braun ST730 - 3555 Satin 7 (Seite 9 von 10) (Englisch)

790342

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

Hair structure Temperature setting

Fine, porous, coloured, bleached 130 °C – 160 °C

Normal 160 °C – 175 °C

Strong, resistant

. . . and for professional styling results 175 °C – 200 °C

The higher the temperature setting, the faster you will get a

sleek straightening result. When working with the maximum

temperature setting, you should not treat the same strand

more than once.

• °C max booster: For handling difficult hair strands, you can

instantly boost the temperature by pushing the «200 °C»

button (4). For 20 seconds, the appliance will heat up to the

maximum temperature with the backlight flashing [D].

Afterwards, the appliance switches back to the previously

selected temperature.

• Safety auto off: For safety reasons, the appliance automatically

switches off after 30 minutes. Five minutes prior to switching

off, the display shows «Auto off» [E] along with a red/green

flashing backlight. If you want to keep on straightening, simply

press the «on/off» button (6) again shortly.

• Memory function: In order to make your styling session as

convenient and quick as possible, the appliance stores your

last personalised settings for the next usage.

Styling

Preparation

• Make sure your hair is completely dry before using the

appliance.

• First, comb your hair through with a wide toothed comb to

remove tangles [G].

• Section your hair off. Starting close to the roots, take a thin

section of hair (strands of 3–4 cm maximum) and clamp it

firmly between the styling plates [H].

How to straighten your hair

• Gently run the straightener through the entire length of the hair,

slowly and steadily, from roots to the ends [I] without stopping

for longer than 2 seconds. This will ensure best straightening

results without damaging your hair. Since the NanoGlide

Ceramic plates are 3 times smoother than conventional

ceramic plates, they protect your hair from damage by

providing friction-free gliding.

• For improved control when gliding along a strand, you may

stabilise the appliance by holding it with the other hand on the

cool touch points (1).

• You can create flicks at the hair ends by slowly turning the

appliance either outwards or inwards before releasing a strand.

How to form curls

With the Braun straightener, you can also create loose curls and

waves [J]:

– Clamp a strand at the roots,

– turn the appliance half a turn,

– then slowly move the appliance horizontally towards hair ends

and the strand will turn into curl.

After use

After each use, switch off the appliance by pushing the «on/off»

button (6) for 1 second.

Residual heat indicator

As long as the appliance is not unplugged, the display turns red

and shows the cooling down symbol [F] during the cooling down

phase. Only when the temperature has dropped below 60 °C, the

display switches off and you can touch the appliance without

any risk.

Cleaning

Always unplug before cleaning. Never immerse the appliance in

water.

Clean the appliance with a damp cloth and use a soft cloth to

dry.

92114914_ST710-730_China.indd 992114914_ST710-730_China.indd 9 27.10.11 08:4427.10.11 08:44

CSS APPROVED Effective Date 28Oct2011 GMT - Printed 06Apr2017 Page 8 of 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Braun ST730 - 3555 Satin 7 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info